Design Blueprint: Buoyancy Glider with Sawtooth Flight for Ocean Sections: Glide, Hull and Endurance Budgets for a 1,000 Metre Vehicle

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24245080): A winged buoyancy glider at a continental slope section line is designed here from first budgets upward. Its operating principle: the vehicle changes buoyancy with a small engine and uses fixed wings to convert vertical motion into forward motion, flying a sawtooth path between the surface and depth while shifting internal mass to steer, so propulsion energy is spent only on buoyancy changes rather than on a propeller. Each dive to 950 metres advances the vehicle about 4.9 kilometres at the adopted glide ratio; the 5.2 kilowatt-hour battery supports roughly 255 dives, near 1262 kilometres of section, before the hotel and buoyancy loads exhaust it. Because forward speed comes from the glide rather than a shaft, the endurance budget is set by how often the buoyancy engine runs and by the hotel load of navigation and sensing, and the study carries the glide ratio as an explicit, challengeable assumption rather than hiding it inside a range figure. Every dimension and rating traces back to budgets for buoyancy, hull pressure, communications where the design carries a link, endurance and sensor drift, all evaluated by the deposited program from its declared inputs. This is a civilian observing design, computed and simulated rather than measured, with no weapon or targeting application anywhere in it. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian Earth ocean observation system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-15
DOI
https://doi.org/10.5281/zenodo.24245886
Primary Topic
Underwater Vehicles and Communication Systems
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Design Blueprint: Buoyancy Glider with Sawtooth Flight for Ocean Sections: Glide, Hull and Endurance Budgets for a 1,000 Metre Vehicle

William Alexander Aldred
Zenodo (CERN European Organization for Nuclear Research)
Underwater Vehicles and Communication Systems
article

Design Blueprint: Buoyancy Glider with Sawtooth Flight for Ocean Sections: Glide, Hull and Endurance Budgets for a 1,000 Metre Vehicle

William Alexander Aldred
article en

Abstract

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24245080): A winged buoyancy glider at a continental slope section line is designed here from first budgets upward. Its operating principle: the vehicle changes buoyancy with a small engine and uses fixed wings to convert vertical motion into forward motion, flying a sawtooth path between the surface and depth while shifting internal mass to steer, so propulsion energy is spent only on buoyancy changes rather than on a propeller. Each dive to 950 metres advances the vehicle about 4.9 kilometres at the adopted glide ratio; the 5.2 kilowatt-hour battery supports roughly 255 dives, near 1262 kilometres of section, before the hotel and buoyancy loads exhaust it. Because forward speed comes from the glide rather than a shaft, the endurance budget is set by how often the buoyancy engine runs and by the hotel load of navigation and sensing, and the study carries the glide ratio as an explicit, challengeable assumption rather than hiding it inside a range figure. Every dimension and rating traces back to budgets for buoyancy, hull pressure, communications where the design carries a link, endurance and sensor drift, all evaluated by the deposited program from its declared inputs. This is a civilian observing design, computed and simulated rather than measured, with no weapon or targeting application anywhere in it. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian Earth ocean observation system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Zenodo (CERN European Organization for Nuclear Research)
Underwater Vehicles and Communication Systems
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon
Design Blueprint: Buoyancy Glider with Sawtooth Flight for Ocean Sections: Glide, Hull and Endurance Budgets for a 1,000 Metre Vehicle — William Alexander Aldred · Zenodo (CERN European Organization for Nuclear Research) (2026) | TGRS Research Map | TGRS