Flow-Rate-Dependent Thermal Performance of a Counter-Flow Double-Pipe Heat Exchanger: Energy-Balance Assessment, Effectiveness Analysis and Statistical Mapping

This study presents an experimental multi-variable performance mapping of a water-to-water counter-flow double-pipe heat exchanger conducted in the Thermo Laboratory of the Department of Mechanical Engineering, Igbinedion University Okada. Twenty steady-state operating conditions were examined in which hot-water flow rate ranged from 1.52 to 4.43 L min⁻¹ and cold-water flow rate from 3.12 to 7.02 L min⁻¹. The exchanger comprises a copper inner tube (outer diameter 25.4 mm), effective length 1.50 m and heat-transfer area 0.120 m² based on the outer surface of the inner tube. Measured heat-transfer rates increased from approximately 1.55 kW to 9.40 kW. The overall heat-transfer coefficient rose from 440 to 5144 W m⁻² K⁻¹ while the logarithmic mean temperature difference declined from 29.3 °C to 15.2 °C. Thermal effectiveness increased from 36.2 % to 74.7 %. Linear regression analyses revealed strong positive associations between hot-water flow rate and both average heat duty (R² = 0.997) and overall heat-transfer coefficient (R² = 0.978). The maximum hot/cold energy-balance discrepancy was 0.65 %. Because both stream flow rates varied simultaneously, the results constitute a multi-variable operating map rather than an isolated single-variable effect study. The work provides a transparent, statistically characterised laboratory baseline that can support teaching, equipment commissioning and preliminary design calculations.

Authors

Institutions

Publication Details

Journal
IPS Journal of Physical Sciences
Published
2026-11-14
DOI
https://doi.org/10.54117/ijps.v3i2.47
Primary Topic
Heat Transfer and Optimization
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Flow-Rate-Dependent Thermal Performance of a Counter-Flow Double-Pipe Heat Exchanger: Energy-Balance Assessment, Effectiveness Analysis and Statistical Mapping

Lucky Olatunde ODEJIMI, Olorunleke Aregbe, Emeke Achojakimoni Okotie
IPS Journal of Physical Sciences
Heat Transfer and Optimization
article

Flow-Rate-Dependent Thermal Performance of a Counter-Flow Double-Pipe Heat Exchanger: Energy-Balance Assessment, Effectiveness Analysis and Statistical Mapping

Lucky Olatunde ODEJIMI, Olorunleke Aregbe, Emeke Achojakimoni Okotie
article en

Abstract

This study presents an experimental multi-variable performance mapping of a water-to-water counter-flow double-pipe heat exchanger conducted in the Thermo Laboratory of the Department of Mechanical Engineering, Igbinedion University Okada. Twenty steady-state operating conditions were examined in which hot-water flow rate ranged from 1.52 to 4.43 L min⁻¹ and cold-water flow rate from 3.12 to 7.02 L min⁻¹. The exchanger comprises a copper inner tube (outer diameter 25.4 mm), effective length 1.50 m and heat-transfer area 0.120 m² based on the outer surface of the inner tube. Measured heat-transfer rates increased from approximately 1.55 kW to 9.40 kW. The overall heat-transfer coefficient rose from 440 to 5144 W m⁻² K⁻¹ while the logarithmic mean temperature difference declined from 29.3 °C to 15.2 °C. Thermal effectiveness increased from 36.2 % to 74.7 %. Linear regression analyses revealed strong positive associations between hot-water flow rate and both average heat duty (R² = 0.997) and overall heat-transfer coefficient (R² = 0.978). The maximum hot/cold energy-balance discrepancy was 0.65 %. Because both stream flow rates varied simultaneously, the results constitute a multi-variable operating map rather than an isolated single-variable effect study. The work provides a transparent, statistically characterised laboratory baseline that can support teaching, equipment commissioning and preliminary design calculations.

IPS Journal of Physical SciencesVol. 3(2)
Igbinedion University (NG)
Heat Transfer and Optimization
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon