Stiffness-normalized fiber-reinforced polymer composite repair thickness for corroded steel pipelines: design maps and correlation

Fiber-reinforced polymer (FRP) systems are widely used to repair corroded steel pipes, but the required repair thickness depends strongly on the stiffness level of the FRP layer, particularly its hoop direction modulus. This study developed finite-element (FE)-based repair thickness maps for externally repaired corroded steel pipes using normalized FRP stiffness levels. An axisymmetric FE model was developed for a steel pipe containing a circumferentially continuous external corrosion groove of finite axial length, filled with epoxy and externally wrapped with an FRP layer. The model was verified against an analytical multilayer thick-cylinder solution based on Lamé theory. A parametric study was performed by varying the pipe's diameter-to-thickness ratio (D/t = 10, 20, 40), normalized defect depth (a/t = 0.10–0.60), and FRP-to-steel-stiffness ratio (EF/E = 0.20–1.20). For each configuration, the required normalized FRP thickness (tF/a) was determined using a 10 % stress tolerance criterion relative to the corresponding intact pipe. The results showed that increasing EF/E reduced the required tF/a, whereas deeper defects required larger normalized repair thicknesses. Several low-stiffness FRP systems exhibited indeterminate feasibility for deeper defects within the investigated thickness range. A compact empirical correlation was proposed to estimate tF/a, achieving R 2 = 0.90, MAE = 0.13, RMSE = 0.34, and MAPE = 7.36 %. Five-fold cross-validation showed comparable predictive performance for held-out cases, further supporting the robustness of the proposed correlation within the investigated parameter range. The developed maps and correlation provide a preliminary stiffness-based framework for FRP thickness selection.

Authors

Institutions

Publication Details

Journal
Mechanical sciences
Published
2026-11-15
DOI
https://doi.org/10.5194/ms-17-1073-2026
Primary Topic
Structural Integrity and Reliability Analysis
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Stiffness-normalized fiber-reinforced polymer composite repair thickness for corroded steel pipelines: design maps and correlation

Mustafa Alhusain
Mechanical sciences
Structural Integrity and Reliability Analysis
article

Stiffness-normalized fiber-reinforced polymer composite repair thickness for corroded steel pipelines: design maps and correlation

Mustafa Alhusain
article en

Abstract

Fiber-reinforced polymer (FRP) systems are widely used to repair corroded steel pipes, but the required repair thickness depends strongly on the stiffness level of the FRP layer, particularly its hoop direction modulus. This study developed finite-element (FE)-based repair thickness maps for externally repaired corroded steel pipes using normalized FRP stiffness levels. An axisymmetric FE model was developed for a steel pipe containing a circumferentially continuous external corrosion groove of finite axial length, filled with epoxy and externally wrapped with an FRP layer. The model was verified against an analytical multilayer thick-cylinder solution based on Lamé theory. A parametric study was performed by varying the pipe's diameter-to-thickness ratio (D/t = 10, 20, 40), normalized defect depth (a/t = 0.10–0.60), and FRP-to-steel-stiffness ratio (EF/E = 0.20–1.20). For each configuration, the required normalized FRP thickness (tF/a) was determined using a 10 % stress tolerance criterion relative to the corresponding intact pipe. The results showed that increasing EF/E reduced the required tF/a, whereas deeper defects required larger normalized repair thicknesses. Several low-stiffness FRP systems exhibited indeterminate feasibility for deeper defects within the investigated thickness range. A compact empirical correlation was proposed to estimate tF/a, achieving R 2 = 0.90, MAE = 0.13, RMSE = 0.34, and MAPE = 7.36 %. Five-fold cross-validation showed comparable predictive performance for held-out cases, further supporting the robustness of the proposed correlation within the investigated parameter range. The developed maps and correlation provide a preliminary stiffness-based framework for FRP thickness selection.

Mechanical sciencesVol. 17(2)
King Faisal University (SA)
Structural Integrity and Reliability Analysis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon
Stiffness-normalized fiber-reinforced polymer composite repair thickness for corroded steel pipelines: design maps and correlation — Mustafa Alhusain · Mechanical sciences (2026) | TGRS Research Map | TGRS