Diffuser-Augmented Shrouded Wind Turbine: Flow Speed-Up, Effective Coefficient and Exit-Area Budgets
This paper presents a computed shrouded turbine design, rated at 75.2 kilowatts, on a single stated operating principle: a ring-shaped diffuser around the rotor lowers the pressure behind the disc and draws more mass flow through it than a bare rotor of the same diameter would capture; the rotor is judged against its throat area while the shroud's exit area and drag are charged to the design in full. The system studied is a rotor 10 metres in diameter inside a flanged diffuser with a flow speed-up factor of 1.55 at the throat, exit-to-throat area ratio 1.9, throat power coefficient 0.48 and rated wind speed 10 metres per second. The target quantity is net electrical output from the computed throat stream power at the accelerated speed, with the effective coefficient on the undisturbed wind and the diffuser exit area printed so the augmentation is never mistaken for free energy. For the shrouded turbine, the net output is 75.2 kilowatts, and the annual yield is 0.198 gigawatt-hours, at a capacity factor of 0.3. Wind speed at the rotor throat is 15.5 metres per second. Effective coefficient on the free stream is 1.79. Diffuser exit area is 149 square metres. Shroud thrust is 5.29 kilonewtons. The study is a civilian energy design throughout, with no targeting or weapon application, and its results are simulated, not measured.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-15
- DOI
- https://doi.org/10.5281/zenodo.24239663
- Primary Topic
- Wind Energy Research and Development
- Type
- article
- Field-Weighted Citation Impact
- 0.00