Effect of welding variables on the microstructure and mechanical properties of cold metal transfer welded high strength dissimilar 6082-7075 aluminum alloys

High-strength aluminum alloys like AA6082-T6 and AA7075-T6 are frequently employed in industries due to their excellent engineering properties, but joining these alloys via conventional welding yielded inadequate results due to high energy input. To address these issues, a low-energy cold metal transfer (CMT) welding technique has been employed to join these alloys using ER4043 filler. Four heat input samples, S-1 (70 J/mm), S-2 (135 J/mm), S-3 (270 J/mm), and S-4 (682 J/mm), were utilized and investigated for their influences on microstructure and mechanical properties. Results revealed that increasing the heat input led to an increase in weld width and penetration depth, and the reinforcement initially increased and decreased after reaching a certain value. The welded sample S-3 yielded a fine dendritic structure (MGS = 28.05 ± 3.15 µm) and uniformly distributed intermetallic phases like α-Al, Mg2Si, Al2CuMg, and Al13Fe4. As the heat input is increased, the deposited weld exhibited superior tensile properties, while the hardness properties are degraded with heat input. S-3 exhibited the highest ultimate tensile strength of 195.54 MP, yield strength of 134.41 MPa, elongation of 10.3%, and hardness of 91 ± 2.42 HV, while S-1 exhibited the least ultimate tensile strength of 108.63 MP, yield strength of 74.37 MPa, elongation of 5.4%, and highest hardness of 91 ± 2.42 HV. FESEM analysis of tensile fractured samples indicated that specimen S-3 displayed a ductile mode of fracture, characterized by fine dimples without any porosities, while specimen S-4 displayed a brittle mode of fracture, with coarser dimples.

Authors

Institutions

Publication Details

Journal
Journal of Adhesion Science and Technology
Published
2026-11-14
DOI
https://doi.org/10.1080/01694243.2026.2761624
Primary Topic
Welding Techniques and Residual Stresses
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effect of welding variables on the microstructure and mechanical properties of cold metal transfer welded high strength dissimilar 6082-7075 aluminum alloys

K. M. Moeed, Md Shakibul Haque
Journal of Adhesion Science and Technology
Welding Techniques and Residual Stresses
article

Effect of welding variables on the microstructure and mechanical properties of cold metal transfer welded high strength dissimilar 6082-7075 aluminum alloys

K. M. Moeed, Md Shakibul Haque
article en

Abstract

High-strength aluminum alloys like AA6082-T6 and AA7075-T6 are frequently employed in industries due to their excellent engineering properties, but joining these alloys via conventional welding yielded inadequate results due to high energy input. To address these issues, a low-energy cold metal transfer (CMT) welding technique has been employed to join these alloys using ER4043 filler. Four heat input samples, S-1 (70 J/mm), S-2 (135 J/mm), S-3 (270 J/mm), and S-4 (682 J/mm), were utilized and investigated for their influences on microstructure and mechanical properties. Results revealed that increasing the heat input led to an increase in weld width and penetration depth, and the reinforcement initially increased and decreased after reaching a certain value. The welded sample S-3 yielded a fine dendritic structure (MGS = 28.05 ± 3.15 µm) and uniformly distributed intermetallic phases like α-Al, Mg2Si, Al2CuMg, and Al13Fe4. As the heat input is increased, the deposited weld exhibited superior tensile properties, while the hardness properties are degraded with heat input. S-3 exhibited the highest ultimate tensile strength of 195.54 MP, yield strength of 134.41 MPa, elongation of 10.3%, and hardness of 91 ± 2.42 HV, while S-1 exhibited the least ultimate tensile strength of 108.63 MP, yield strength of 74.37 MPa, elongation of 5.4%, and highest hardness of 91 ± 2.42 HV. FESEM analysis of tensile fractured samples indicated that specimen S-3 displayed a ductile mode of fracture, characterized by fine dimples without any porosities, while specimen S-4 displayed a brittle mode of fracture, with coarser dimples.

Journal of Adhesion Science and Technology
Integral University (IN)
Welding Techniques and Residual Stresses
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon