Dust-Lattice Wave Speeds in a Plasma Crystal: Longitudinal and Transverse Sound of the Yukawa Lattice
A plasma crystal lattice is examined for a two-dimensional plasma crystal of the kind formed in the PK-3 Plus experiment and in ground radio-frequency cells, with 9.55 micrometre grains spaced about 250 micrometres apart in a hexagonal lattice. Principal computed quantities, for PK3 Plus phonon branch: lattice grain charge e = 2.052e+04; dust plasma frequency rad s = 336.8; dust plasma frequency Hz = 53.61; longitudinal speed cm s = 4.982; transverse speed cm s = 2.063; speed ratio transverse to longitudinal = 0.414. The governing idea, for PK3 Plus phonon branch, is stated plainly, for PK3 Plus phonon branch. A charged-grain lattice carries sound: longitudinal compression waves and transverse shear waves whose speeds are set by the dust plasma frequency, the lattice spacing and the screening parameter, with the transverse mode existing only because the lattice, unlike the liquid, sustains shear. The values above, for PK3 Plus phonon branch, come from the dust-lattice waves relations, for PK3 Plus phonon branch, set out, for PK3 Plus phonon branch, in the Methods, for PK3 Plus phonon branch, and are compared, for PK3 Plus phonon branch, with published values, for PK3 Plus phonon branch, in the Discussion, for PK3 Plus phonon branch. Computed, for PK3 Plus phonon branch, from stated assumptions, for PK3 Plus phonon branch, and published inputs, for PK3 Plus phonon branch; not a new measurement, for PK3 Plus phonon branch, in this study, for PK3 Plus phonon branch.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-15
- DOI
- https://doi.org/10.5281/zenodo.24245219
- Primary Topic
- Dust and Plasma Wave Phenomena
- Type
- article
- Field-Weighted Citation Impact
- 0.00