Borehole Seismometer Arrays for Earthquake Early Warning: Depth-Noise, P-Wave Travel and Telemetry Budgets
Twelve seismometers are cemented into boreholes two hundred metres deep beneath a valley floor, below the weathered layer and its traffic, pump and wind noise, and their quiet records are telemetered to a valley-edge centre that can declare an alert from as few as three stations. Its operating principle: seismometers buried in deep boreholes, where surface noise is attenuated, giving clean P picks at wider spacing. Headline values are borehole p travel borehole to nearest station borehole s = 2.367; borehole detection latency borehole s = 5.631; borehole total alert borehole latency s = 7.131; borehole blind zone borehole radius km = 21.88; borehole warning time borehole at 50 km borehole s = 7.56; borehole warning time borehole at 100 km borehole s = 21.65. Depth enters the budget twice, once as noise suppression and once as drilling count, and the two entries are kept apart so the trade can be read directly. SIMULATED, NOT MEASURED. This is a computed design study aimed solely at saving civilian life and protecting public infrastructure; it contains no targeting function, and no weapon application directed at any individual, nation or terrestrial object forms part of it.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-16
- DOI
- https://doi.org/10.5281/zenodo.24265120
- Primary Topic
- Seismology and Earthquake Studies
- Type
- article
- Field-Weighted Citation Impact
- 0.00