Design and Experimental Validation of a Compact Vertical Tire Testing Device for Stiffness and Damping Coefficients

Pneumatic tire stiffness and damping are key parameters governing vehicle dynamics, ride comfort, and energy losses, yet their experimental determination often relies on large, expensive test rigs or indirect vehicle-based methods. To provide a compact and cost-effective alternative suitable for laboratory and educational environments, this study presents the design, construction, and validation of a vertical tire testing device developed in Atılım University ATEV racing car program. The machine combines a modular steel–aluminum frame, a pneumatic loading system, and a rail-guided carrier with four load cells and a displacement sensor, enabling controlled cyclic loading of a mounted tire. Structural integrity of the test rig was verified using finite element analysis in ANSYS, and experimental measurements were acquired via an Arduino-based data acquisition system and processed in MATLAB. A 90/90 R16 motorcycle tire was subjected to ten loading–unloading cycles over 220 s, producing peak forces of about 1500 N and a maximum vertical deflection of 13.5 mm, with clear hysteresis loops in the force–deflection plane. The vertical tire response was modeled using a linear Kelvin–Voigt formulation, and the stiffness and damping parameters were identified via least-squares regression after low-pass filtering and numerical differentiation of the displacement signal. The resulting effective parameters, k=106 kN/m and c=14.6 kN•s/m, yielded good agreement between measured and predicted forces, as reflected by relatively small RMSE and MAE values. These findings demonstrate that the proposed device can reliably characterize tire viscoelastic behavior under low-frequency, non-rolling excitation and provide meaningful input data for simplified suspension and vehicle dynamics analyses, while offering a flexible platform for future studies involving different tire types, operating conditions, and more advanced viscoelastic models.

Authors

Institutions

Publication Details

Journal
Black Sea Journal of Engineering and Science
Published
2026-11-15
DOI
https://doi.org/10.34248/bsengineering.2013341
Primary Topic
Vehicle Dynamics and Control Systems
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Design and Experimental Validation of a Compact Vertical Tire Testing Device for Stiffness and Damping Coefficients

Ali Emin, Ozgur Akdeniz, Olgu Üstün, Umut Berke Haktanır et al.
Black Sea Journal of Engineering and Science
Vehicle Dynamics and Control Systems
article

Design and Experimental Validation of a Compact Vertical Tire Testing Device for Stiffness and Damping Coefficients

Ali Emin, Ozgur Akdeniz, Olgu Üstün, Umut Berke Haktanır, Emre Çelikcan
article en

Abstract

Pneumatic tire stiffness and damping are key parameters governing vehicle dynamics, ride comfort, and energy losses, yet their experimental determination often relies on large, expensive test rigs or indirect vehicle-based methods. To provide a compact and cost-effective alternative suitable for laboratory and educational environments, this study presents the design, construction, and validation of a vertical tire testing device developed in Atılım University ATEV racing car program. The machine combines a modular steel–aluminum frame, a pneumatic loading system, and a rail-guided carrier with four load cells and a displacement sensor, enabling controlled cyclic loading of a mounted tire. Structural integrity of the test rig was verified using finite element analysis in ANSYS, and experimental measurements were acquired via an Arduino-based data acquisition system and processed in MATLAB. A 90/90 R16 motorcycle tire was subjected to ten loading–unloading cycles over 220 s, producing peak forces of about 1500 N and a maximum vertical deflection of 13.5 mm, with clear hysteresis loops in the force–deflection plane. The vertical tire response was modeled using a linear Kelvin–Voigt formulation, and the stiffness and damping parameters were identified via least-squares regression after low-pass filtering and numerical differentiation of the displacement signal. The resulting effective parameters, k=106 kN/m and c=14.6 kN•s/m, yielded good agreement between measured and predicted forces, as reflected by relatively small RMSE and MAE values. These findings demonstrate that the proposed device can reliably characterize tire viscoelastic behavior under low-frequency, non-rolling excitation and provide meaningful input data for simplified suspension and vehicle dynamics analyses, while offering a flexible platform for future studies involving different tire types, operating conditions, and more advanced viscoelastic models.

Black Sea Journal of Engineering and ScienceVol. 9(6)
Atilim University (TR)
Vehicle Dynamics and Control Systems
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon