Capillary Pressure in a Drainage Sandstone: The Leverett J-Function and Pore-Entry Budgets
For a sandstone core of permeability 150 millidarcies and porosity 0.20, water-wet, drained by oil of interfacial tension 0.030 newtons per metre against brine, this paper computes a capillary-pressure and Leverett J-function budget. Principal quantities for drainage sandstone sample are: interfacial tension N m = 0.03 newtons per metre; contact angle deg = 30 degrees; throat radius m = 8.000e-06 metres; entry pressure Pa = 6,495.2 pascals; entry pressure kPa = 6.495 kilopascals; permeability m2 = 1.480e-13 square metres. Because seal capacity and transition-zone height are set by the fine end of the throat distribution, entry pressures for bracketing throat radii are computed alongside the representative value. Every value for drainage sandstone sample comes from deposited code for drainage sandstone sample. Re-running that code for drainage sandstone sample with other published values for drainage sandstone sample revises the entry pressure kPa of 6.495 kilopascals for drainage sandstone sample directly; remaining quantities for drainage sandstone sample follow: porosity = 0.2 dimensionless; leverett J = 0.1863 dimensionless; column height supported m = 2.702 metres; entry pressure 4um kPa = 12.99 kilopascals; entry pressure 20um kPa = 2.598 kilopascals.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-15
- DOI
- https://doi.org/10.5281/zenodo.24238039
- Primary Topic
- Enhanced Oil Recovery Techniques
- Type
- article
- Field-Weighted Citation Impact
- 0.00