Improving the thermal and mechanical features of polyester reinforced with orange peel waste micro-particles

Orange peel waste offers a potential particulate filler for polymer composites, but its influence depends on particle size, loading, and the property being considered. This experimental study examines polyester composites containing orange peel particles with nominal sizes of 125, 212, and 250 μm at mass fractions of 2, 4, 6, and 8 wt.%, alongside unfilled polyester. The peels were washed, oven-dried at 60 °C for 30 min, ground, and separated into the three size fractions before mixing and casting. The reported measurements comprise tensile stress–strain behavior, tensile strength, Young’s modulus, flexural strength, Shore D hardness, and thermal conductivity. The summary plots indicate that the 125 μm fraction generally produced the highest values, with tensile strength, modulus, and flexural strength reaching their highest reported measurement values at 6 wt.%. Young’s modulus increased from 385 to 674 MPa, whereas hardness increased from 36.8 to 66.36 Shore D units and reached its maximum at 8 wt.%. Thermal conductivity increased from 0.00109 to 0.03673 W/(m·K). The tensile-strength summary reports an increase from 29.504 to 50.592 MPa, although its unfilled reference conflicts with the stress–strain curves and requires reconciliation. The results suggest property-specific responses rather than a single optimum formulation: additional filler beyond 6 wt.% reduced several mechanical responses while hardness and conductivity continued to increase for the smallest particles. Missing uncertainty estimates and an unresolved tensile-reference discrepancy limit quantitative interpretation. The findings support further evaluation of orange peel as a polyester filler, without establishing biodegradability, improved thermal insulation, or application-level performance.

Authors

Institutions

Publication Details

Journal
Revista Cultura Científica
Published
2026-11-15
DOI
https://doi.org/10.70517/revcc2624194
Primary Topic
Natural Fiber Reinforced Composites
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Improving the thermal and mechanical features of polyester reinforced with orange peel waste micro-particles

Zainab S. Abdul-Ridha, Hind W. Abdullah, Bushra H. Hussein, Adil I. Kadim et al.
Revista Cultura Científica
Natural Fiber Reinforced Composites
article

Improving the thermal and mechanical features of polyester reinforced with orange peel waste micro-particles

Zainab S. Abdul-Ridha, Hind W. Abdullah, Bushra H. Hussein, Adil I. Kadim, Zainab Waleed Ahmed
article en

Abstract

Orange peel waste offers a potential particulate filler for polymer composites, but its influence depends on particle size, loading, and the property being considered. This experimental study examines polyester composites containing orange peel particles with nominal sizes of 125, 212, and 250 μm at mass fractions of 2, 4, 6, and 8 wt.%, alongside unfilled polyester. The peels were washed, oven-dried at 60 °C for 30 min, ground, and separated into the three size fractions before mixing and casting. The reported measurements comprise tensile stress–strain behavior, tensile strength, Young’s modulus, flexural strength, Shore D hardness, and thermal conductivity. The summary plots indicate that the 125 μm fraction generally produced the highest values, with tensile strength, modulus, and flexural strength reaching their highest reported measurement values at 6 wt.%. Young’s modulus increased from 385 to 674 MPa, whereas hardness increased from 36.8 to 66.36 Shore D units and reached its maximum at 8 wt.%. Thermal conductivity increased from 0.00109 to 0.03673 W/(m·K). The tensile-strength summary reports an increase from 29.504 to 50.592 MPa, although its unfilled reference conflicts with the stress–strain curves and requires reconciliation. The results suggest property-specific responses rather than a single optimum formulation: additional filler beyond 6 wt.% reduced several mechanical responses while hardness and conductivity continued to increase for the smallest particles. Missing uncertainty estimates and an unresolved tensile-reference discrepancy limit quantitative interpretation. The findings support further evaluation of orange peel as a polyester filler, without establishing biodegradability, improved thermal insulation, or application-level performance.

Revista Cultura CientíficaVol. 2026(24)
University of Baghdad (IQ), Ministry of Education (IQ), University of Diyala (IQ)
Natural Fiber Reinforced Composites
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon