Kaolinite Clay in Supercooled Droplets: A Site Spectrum Steep Enough to Matter Only Below Minus Twenty Degrees
Rests on the active-site description applied to a well-characterised clay mineral, where the site density climbs by roughly a third of a decade per kelvin of cooling, so the mineral is nearly inert at warm temperatures and genuinely busy twenty degrees lower: the calculation for the kaolinite case. Its subject is kaolinite platelets of the standard reference sample used in immersion-freezing assays, evaluated at minus twenty-four degrees Celsius with a site density of 3e9 per square metre at that temperature, a slope of 0.35 decades per kelvin, eight hundred square micrometres of immersed clay surface per assay droplet, a clay surface area of 1e-8 square metres per litre of air, a stated contact angle of sixty-eight degrees and an interfacial energy of 0.033 joules on a square metre. It derives the site density and expected sites per droplet at minus twenty-four degrees, the frozen fraction of the assay, the airborne particle concentration implied at the same temperature, and the change in all three across a single kelvin. The kaolinite case in numbers: 3,000,000,000 sites per m2 for the kaolinite case, 2.4 sites in one assay droplet of the kaolinite case, a frozen fraction of 0.909 for the kaolinite case, and 30.0 freezing particles per litre for the kaolinite case. Kaolinite became the laboratory's reference clay precisely because it is unremarkable; its budget shows what unremarkable means in numbers.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-15
- DOI
- https://doi.org/10.5281/zenodo.24242725
- Primary Topic
- Atmospheric aerosols and clouds
- Type
- article
- Field-Weighted Citation Impact
- 0.00