Cross-Flow River Turbine Power: Runner Swept Area, Stream Power and Run-of-River Duty Budgets
The cross-flow runner is presented here: a computed cross-flow runner design, rated at 87.7 kilowatts, on the cross-flow runner's single stated cross-flow runner operating principle: a cross-flow runner — a cylindrical cage of curved blades on a horizontal axis set across a river's flow — admits water through one side of the cage, across its interior, and out through the far side, so each blade works twice per revolution and the machine thrives on modest, steady river currents without any dam or head. The cross-flow runner system is a runner 2.5 metres in diameter and 8 metres wide in a river flowing at 3.0 metres per second, in fresh water, with power coefficient 0.38 on the computed swept area and a high capacity factor reflecting run-of-river steadiness. The cross-flow runner's target is the cross-flow runner net electrical output from the freshwater stream power through the runner's swept area under the stated coefficient and drivetrain efficiency, with thrust printed for the frame and debris screen design. For the cross-flow runner, the net output is 87.7 kilowatts, and the cross-flow runner's annual yield is 0.423 gigawatt-hours, at the cross-flow runner's capacity factor of 0.55. The runner's swept area of 20.0 square metres meets 270 kilowatts of stream power, its thrust is 85.5 kilonewtons, and its blade tips move at 4.8 metres per second. This is a simulated design study for civilian energy, not a measurement, and it carries no weapon or targeting application.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-15
- DOI
- https://doi.org/10.5281/zenodo.24238393
- Primary Topic
- Wind Energy Research and Development
- Type
- article
- Field-Weighted Citation Impact
- 0.00