Effect of Data Augmentation and Membership Functions on ANFIS-Based Tensile Strength Prediction of FDM-Printed PETG Parts
Fused deposition modeling (FDM) enables the fabrication of complex polymeric components; however, the tensile performance of printed parts is strongly influenced by processing conditions and can be difficult to predict when only a limited number of experimental observations are available. This study investigates the use of linear interpolation-based data augmentation combined with an adaptive neuro-fuzzy inference system (ANFIS) for predicting the tensile strength of FDM-printed polyethylene terephthalate glycol-modified (PETG) specimens. Layer thickness, infill density, and nozzle temperature were investigated using a Taguchi L9 experimental design, with three specimens fabricated for each condition and their mean tensile strength values used as the reference dataset. The experimental data were augmented in MATLAB using linear interpolation to generate datasets containing 200, 400, and 600 samples. Gaussian ANFIS models with three membership function configurations (M222, M333, and M444) were subsequently developed using 60/40, 70/30, and 80/20 training/testing ratios. Model performance was assessed using R2, MSE, and MEP, and a multi-criteria performance index was employed to determine the optimum configuration. The results showed that increasing the number of membership functions generally improved prediction accuracy, whereas increasing the augmented dataset size did not necessarily result in continuous performance gains. The optimum configuration was obtained with 400 augmented samples, an 80/20 training/testing ratio, and the M444 structure, yielding testing R2, MSE, and MEP values of 0.998935, 0.053107, and 0.00548758, respectively. The findings demonstrate that combining interpolation-based data augmentation with ANFIS provides an effective approach for predicting the tensile strength of FDM-printed PETG components when experimental datasets are limited.
Authors
- Ömer Çerlek (ORCID: https://orcid.org/0000-0003-2490-5915)
Institutions
- Sakarya Uygulamalı Bilimler Üniversitesi (TR)
Publication Details
- Journal
- Black Sea Journal of Engineering and Science
- Published
- 2026-11-15
- DOI
- https://doi.org/10.34248/bsengineering.2023280
- Primary Topic
- Additive Manufacturing and 3D Printing Technologies
- Type
- article
- Field-Weighted Citation Impact
- 0.00