Buoyancy Glider with Sawtooth Flight for Ocean Sections: Glide, Hull and Endurance Budgets for a 1,000 Metre Vehicle
A winged buoyancy glider at a continental slope section line is designed here from first budgets upward. Its operating principle: the vehicle changes buoyancy with a small engine and uses fixed wings to convert vertical motion into forward motion, flying a sawtooth path between the surface and depth while shifting internal mass to steer, so propulsion energy is spent only on buoyancy changes rather than on a propeller. Each dive to 950 metres advances the vehicle about 4.9 kilometres at the adopted glide ratio; the 5.2 kilowatt-hour battery supports roughly 255 dives, near 1262 kilometres of section, before the hotel and buoyancy loads exhaust it. Because forward speed comes from the glide rather than a shaft, the endurance budget is set by how often the buoyancy engine runs and by the hotel load of navigation and sensing, and the study carries the glide ratio as an explicit, challengeable assumption rather than hiding it inside a range figure. Every dimension and rating traces back to budgets for buoyancy, hull pressure, communications where the design carries a link, endurance and sensor drift, all evaluated by the deposited program from its declared inputs. This is a civilian observing design, computed and simulated rather than measured, with no weapon or targeting application anywhere in it.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-15
- DOI
- https://doi.org/10.5281/zenodo.24245079
- Primary Topic
- Underwater Vehicles and Communication Systems
- Type
- article
- Field-Weighted Citation Impact
- 0.00