Propeller-Driven Autonomous Underwater Vehicle for Seafloor Survey: Thrust, Hull and Energy Budgets for a 3,000 Metre Vehicle
The subject is a torpedo-form propeller AUV proposed for an abyssal survey block. The system works as follows: a single stern propeller drives a streamlined torpedo-form body along pre-planned survey lines a fixed height above the seafloor, with inertial and acoustic navigation holding the line while side-scan, bathymetry and photographic sensors record the bottom. At a cruise speed of 1.6 metres per second the drag budget draws 0.62 kilowatts of propulsion; with hotel load the 18 kilowatt-hour battery gives 20.2 hours and about 117 kilometres of survey line per dive, while the titanium hull at 3000 metres needs 28.6 millimetres of wall. Survey quality is a navigation budget as much as a sensor budget: the acoustic positioning link that ties the vehicle to the ship or to seafloor transponders is therefore sized alongside thrust and energy, with its signal margin stated at the working range. Buoyancy, pressure, link, endurance and drift budgets determine the whole sizing; the deposited script performs the arithmetic from the inputs it declares. Computed, not measured, and intended solely for civilian ocean observation, the design has no connection with any weapon or targeting purpose.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-15
- DOI
- https://doi.org/10.5281/zenodo.24245165
- Primary Topic
- Underwater Vehicles and Communication Systems
- Type
- article
- Field-Weighted Citation Impact
- 0.00