Crown Fracture of a Released Slab: Tensile Stress Accumulation and Maximum Slab Length
For a slab on a 38-degree slope, at density 270 kilograms per cubic metre, whose failed weak layer retains residual friction of 0.25, the slab's tensile strength at that density being 125 kilopascals: A crown tensile-fracture budget is computed. The crown-fracture slab principal quantities are: hanging density kg m3 = 270.0 kilograms per cubic metre; residual friction = 0.25 dimensionless; net driving factor = 0.4187 dimensionless; crown tensile strength kPa = 125.0 kilopascals; stress accumulation Pa per m = 1,108.9 pascals per metre; maximum slab length m = 112.7 metres. Because membrane stress is independent of thickness, the budget separates cleanly into a stress side set by density, angle and friction, and a force side where thickness returns through the crown load. Remaining quantities for the crown-fracture slab follow: tensile stress at 40m kPa = 44.356 kilopascals; tensile stress at 25m kPa = 27.723 kilopascals; crown force per width kN m = 93.75 kilonewtons per metre; hanging slab thickness m = 0.75 metres; crown failure strain = 5.441e-04 dimensionless.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-15
- DOI
- https://doi.org/10.5281/zenodo.24241589
- Primary Topic
- Landslides and related hazards
- Type
- article
- Field-Weighted Citation Impact
- 0.00