Optimization and Reusability of coal fly ash-Silica Composite Catalyst for sustainable Green Diesel Production from Used Cooking Oil

The world energy demand has witness steady increase in recent time, this is driven by rapid growth in population, commercialization, industrialization, and advancement in technology. Researchers across the globe have intensified the search for alternatives energy to transportation fuels. Green diesel, otherwise known as Hydrogenation-derived renewable diesel (HDRD) is a potentials substitute for conventional diesel due to its paraffinic hydrocarbon composition which is compatible with compression-ignition (CI) engines without modification. This research investigates the potential of a coal fly ash (FA) admixture with silica oxide (SiO₂) composite for converting used cooking oil (UCO) into green diesel through hydrogenation process. A fine grained, powdery by product produced from burning pulverized coal in thermal power plant also refer to as coal fly ash collected from Eskom Holdings SOC Limited, South Africa, was sieved, and calcined before being mixed with SiO₂ at a 70:30 wt.% ratio. The composite was characterized using Fourier-transform infrared spectroscopy (FTIR), Brunauer–Emmett–Teller (BET) surface area analysis, X-ray diffraction (XRD), and thermal analysis to evaluate its functional groups, textural properties, crystalline phases, and thermal behaviour. The outcome shows a significant improvement in the textural characteristics of the composite compared to the unmodified bio- base Thermal power plant fly ash (BBTPPFS). The measured surface area increased from 0.8321 to 40.2332 m²/g, while the reported pore volume increased from 0.0040 to 0.1504 cm³/g. The corresponding pore-volume calibration changed from −0.0001 to 0.0015 cm³/g, The negative value requires confirmation against the original analytical results. These different confirmed that SiO₂ inclusion substantially modified the catalyst's accessible surface and pore structure, potentially improving reactant–catalyst potential interactions during hydro processing. The FA+SO2 also revealed physicochemical characteristics consistent with its potential to facilitate hydrogenation, deoxygenation, and controlled cracking of UCO. The combination of silica oxides and fly ash was established to be a technical potential of vaporizing fly ash and used cooking oil through an integrated waste to catalyst pathway.

Authors

Publication Details

Journal
ABUAD Journal of Engineering Research and Development (AJERD)
Published
2026-11-15
DOI
https://doi.org/10.53982/ajerd.2026.0903.24-j
Primary Topic
Biodiesel Production and Applications
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Optimization and Reusability of coal fly ash-Silica Composite Catalyst for sustainable Green Diesel Production from Used Cooking Oil

Josiah Pelemo, Moshibudi Caroline Khoathane, MAVHUNGU Lucey Mapula
ABUAD Journal of Engineering Research and Development (AJERD)
Biodiesel Production and Applications
article

Optimization and Reusability of coal fly ash-Silica Composite Catalyst for sustainable Green Diesel Production from Used Cooking Oil

Josiah Pelemo, Moshibudi Caroline Khoathane, MAVHUNGU Lucey Mapula
article en

Abstract

The world energy demand has witness steady increase in recent time, this is driven by rapid growth in population, commercialization, industrialization, and advancement in technology. Researchers across the globe have intensified the search for alternatives energy to transportation fuels. Green diesel, otherwise known as Hydrogenation-derived renewable diesel (HDRD) is a potentials substitute for conventional diesel due to its paraffinic hydrocarbon composition which is compatible with compression-ignition (CI) engines without modification. This research investigates the potential of a coal fly ash (FA) admixture with silica oxide (SiO₂) composite for converting used cooking oil (UCO) into green diesel through hydrogenation process. A fine grained, powdery by product produced from burning pulverized coal in thermal power plant also refer to as coal fly ash collected from Eskom Holdings SOC Limited, South Africa, was sieved, and calcined before being mixed with SiO₂ at a 70:30 wt.% ratio. The composite was characterized using Fourier-transform infrared spectroscopy (FTIR), Brunauer–Emmett–Teller (BET) surface area analysis, X-ray diffraction (XRD), and thermal analysis to evaluate its functional groups, textural properties, crystalline phases, and thermal behaviour. The outcome shows a significant improvement in the textural characteristics of the composite compared to the unmodified bio- base Thermal power plant fly ash (BBTPPFS). The measured surface area increased from 0.8321 to 40.2332 m²/g, while the reported pore volume increased from 0.0040 to 0.1504 cm³/g. The corresponding pore-volume calibration changed from −0.0001 to 0.0015 cm³/g, The negative value requires confirmation against the original analytical results. These different confirmed that SiO₂ inclusion substantially modified the catalyst's accessible surface and pore structure, potentially improving reactant–catalyst potential interactions during hydro processing. The FA+SO2 also revealed physicochemical characteristics consistent with its potential to facilitate hydrogenation, deoxygenation, and controlled cracking of UCO. The combination of silica oxides and fly ash was established to be a technical potential of vaporizing fly ash and used cooking oil through an integrated waste to catalyst pathway.

ABUAD Journal of Engineering Research and Development (AJERD)Vol. 9(3)
Biodiesel Production and Applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon