Expendable Bathythermograph-Style Sensor Line for Rapid Surveys: Fall-Rate, Depth-Accuracy and Cost Budgets for Underway Temperature Sections
This paper presents a computed design for an expendable falling temperature probe at an underway survey route between ports, operating on the following principle: a small probe is dropped from a moving ship and falls at a predictable rate while a fine wire unreels from both probe and ship, carrying its temperature signal back until the wire breaks, so depth is inferred from elapsed time and a calibrated fall-rate equation with no recovery of the probe. The fall-rate equation places the probe at 760 metres after 118 seconds, with a depth uncertainty of about 17 metres from the adopted fall-rate tolerance; a 48 probe line at 12 knots spaces profiles 17 kilometres apart and consumes its whole instrument budget in a single transit, by design. Expendability is the principle, not a compromise: by surrendering the probe, the survey gains a moving ship, no winch, no station time and a section completed in hours, and the budgets price that exchange in depth accuracy, wire behaviour and cost per profile. All sizing follows from computed buoyancy, pressure-hull, acoustic-link where carried, energy-endurance and sensor-drift budgets, each worked in the deposited calculation script from stated inputs. The study is a design exercise for civilian ocean science; it is simulated, not measured, and no part of it concerns any weapon or targeting application.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-15
- DOI
- https://doi.org/10.5281/zenodo.24245131
- Primary Topic
- Underwater Vehicles and Communication Systems
- Type
- article
- Field-Weighted Citation Impact
- 0.00