Interphase‐controlled crystallization and Maxwell–Wagner–Sillars polarization in hybrid polyether ether ketone–carbon fibre–TiB 2 composites

Abstract Hybrid polyether ether ketone–carbon fibre–TiB 2 (PEEK–CF–TiB 2 ) composites were investigated to elucidate the coupled influence of TiB 2 loading (0–3 wt%) and melt‐mixing duration (30 and 40 min) on crystallization, microstructural evolution and dielectric response. In the K30 series, TiB 2 promoted heterogeneous nucleation, increasing the crystallization temperature from 273.3 to 281.2 °C at K30‐2, while the crystalline fraction increased from 40.4% to a maximum of 49.9% at K30‐3. Prolonged mixing produced a distinct thermal response in the K40 series, characterized by a progressive increase in glass transition temperature from 155 to 174 °C and a non‐monotonic evolution of crystallinity. Field‐emission scanning electron microscopy revealed a finer and more spatially distributed particulate morphology after prolonged mixing, while X‐ray diffraction confirmed retention of the characteristic crystalline phases and processing‐dependent variation in PEEK crystalline ordering. Isothermal thermogravimetric analysis established high mass retention throughout the processing‐relevant thermal exposure. Dielectric spectroscopy showed an increase in dielectric constant from 487 to 836 at 1 kHz across the K40 series, accompanied by controlled loss‐tangent values and frequency‐dependent conductivity characteristic of an interfacial‐polarization‐dominated electrical regime. The combined thermal, morphological, crystallographic and dielectric results demonstrate that melt‐mixing duration regulates the balance between heterogeneous nucleation, segmental constraint and Maxwell–Wagner–Sillars polarization in hybrid PEEK–CF–TiB 2 composites. © 2026 Society of Chemical Industry.

Authors

Institutions

Publication Details

Journal
Polymer International
Published
2026-11-15
DOI
https://doi.org/10.1002/pi.70229
Primary Topic
Polymer crystallization and properties
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Interphase‐controlled crystallization and Maxwell–Wagner–Sillars polarization in hybrid polyether ether ketone–carbon fibre–TiB 2 composites

Balasubramanian Kandasubramanian, Manisha G. Kulthe, Kshitija Sanjay Vaidya, Anuj Dahiwal
Polymer International
Polymer crystallization and properties
article

Interphase‐controlled crystallization and Maxwell–Wagner–Sillars polarization in hybrid polyether ether ketone–carbon fibre–TiB 2 composites

Balasubramanian Kandasubramanian, Manisha G. Kulthe, Kshitija Sanjay Vaidya, Anuj Dahiwal
article en

Abstract

Abstract Hybrid polyether ether ketone–carbon fibre–TiB 2 (PEEK–CF–TiB 2 ) composites were investigated to elucidate the coupled influence of TiB 2 loading (0–3 wt%) and melt‐mixing duration (30 and 40 min) on crystallization, microstructural evolution and dielectric response. In the K30 series, TiB 2 promoted heterogeneous nucleation, increasing the crystallization temperature from 273.3 to 281.2 °C at K30‐2, while the crystalline fraction increased from 40.4% to a maximum of 49.9% at K30‐3. Prolonged mixing produced a distinct thermal response in the K40 series, characterized by a progressive increase in glass transition temperature from 155 to 174 °C and a non‐monotonic evolution of crystallinity. Field‐emission scanning electron microscopy revealed a finer and more spatially distributed particulate morphology after prolonged mixing, while X‐ray diffraction confirmed retention of the characteristic crystalline phases and processing‐dependent variation in PEEK crystalline ordering. Isothermal thermogravimetric analysis established high mass retention throughout the processing‐relevant thermal exposure. Dielectric spectroscopy showed an increase in dielectric constant from 487 to 836 at 1 kHz across the K40 series, accompanied by controlled loss‐tangent values and frequency‐dependent conductivity characteristic of an interfacial‐polarization‐dominated electrical regime. The combined thermal, morphological, crystallographic and dielectric results demonstrate that melt‐mixing duration regulates the balance between heterogeneous nucleation, segmental constraint and Maxwell–Wagner–Sillars polarization in hybrid PEEK–CF–TiB 2 composites. © 2026 Society of Chemical Industry.

Polymer International
Defence Institute of Advanced Technology (IN), COEP Technological University (IN)
Polymer crystallization and properties
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon