Design Blueprint: Vortex-Induced-Vibration Wind Harvester: Strouhal Frequency, Oscillation Amplitude and Micro-Power Budgets

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24239826): This paper presents a computed vibration harvester design, rated at 0.012 kilowatts, on a single stated operating principle: a bluff cylinder on a flexible mount sheds alternating vortices in the wind and the resulting lift oscillation drives the cylinder across the flow; a generator in the mount converts that transverse oscillation to electricity — there is no rotor, only a body tuned so its shedding frequency meets its natural frequency. The system studied is a cylinder 0.25 metres in diameter and 3 metres long, oscillating with amplitude of 0.6 diameters at a wind speed of 6 metres per second, with Strouhal number 0.2 and an extraction coefficient of 0.18 on the swept area. The target quantity is net electrical output in the watts range, computed honestly from the oscillation frequency, the swept area of the stroke and the stream power through it, so the device's true niche — autonomous sensors — is sized by numbers rather than adjectives. For the vibration harvester, the net output is 0.012 kilowatts, and the annual yield is 30.4 kilowatt-hours, at a capacity factor of 0.3. Vortex shedding frequency is 4.8 hertz. Swept area of the stroke is 0.9 square metres. Stream power through the swept area is 0.119 kilowatts. Flow Reynolds number is 102,740. The design exists to supply civilian energy and for no other purpose; it carries no targeting or weapon application, and its figures are simulated, not measured. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian wind energy system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-15
DOI
https://doi.org/10.5281/zenodo.24241902
Primary Topic
Innovative Energy Harvesting Technologies
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Design Blueprint: Vortex-Induced-Vibration Wind Harvester: Strouhal Frequency, Oscillation Amplitude and Micro-Power Budgets

William Alexander Aldred
Zenodo (CERN European Organization for Nuclear Research)
Innovative Energy Harvesting Technologies
article

Design Blueprint: Vortex-Induced-Vibration Wind Harvester: Strouhal Frequency, Oscillation Amplitude and Micro-Power Budgets

William Alexander Aldred
article en

Abstract

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24239826): This paper presents a computed vibration harvester design, rated at 0.012 kilowatts, on a single stated operating principle: a bluff cylinder on a flexible mount sheds alternating vortices in the wind and the resulting lift oscillation drives the cylinder across the flow; a generator in the mount converts that transverse oscillation to electricity — there is no rotor, only a body tuned so its shedding frequency meets its natural frequency. The system studied is a cylinder 0.25 metres in diameter and 3 metres long, oscillating with amplitude of 0.6 diameters at a wind speed of 6 metres per second, with Strouhal number 0.2 and an extraction coefficient of 0.18 on the swept area. The target quantity is net electrical output in the watts range, computed honestly from the oscillation frequency, the swept area of the stroke and the stream power through it, so the device's true niche — autonomous sensors — is sized by numbers rather than adjectives. For the vibration harvester, the net output is 0.012 kilowatts, and the annual yield is 30.4 kilowatt-hours, at a capacity factor of 0.3. Vortex shedding frequency is 4.8 hertz. Swept area of the stroke is 0.9 square metres. Stream power through the swept area is 0.119 kilowatts. Flow Reynolds number is 102,740. The design exists to supply civilian energy and for no other purpose; it carries no targeting or weapon application, and its figures are simulated, not measured. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian wind energy system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Zenodo (CERN European Organization for Nuclear Research)
Innovative Energy Harvesting Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon
Design Blueprint: Vortex-Induced-Vibration Wind Harvester: Strouhal Frequency, Oscillation Amplitude and Micro-Power Budgets — William Alexander Aldred · Zenodo (CERN European Organization for Nuclear Research) (2026) | TGRS Research Map | TGRS