Design Blueprint: Flexible-Membrane Wave Power: Bulge-Wave Propagation, Hydraulic Take-Off and Capture-Length Budgets

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24238411): The flexible membrane is presented here: a computed flexible membrane design, rated at 294 kilowatts, on the flexible membrane's single stated flexible membrane operating principle: a long, fluid-filled flexible membrane lying along the wave direction develops a bulge wave that travels inside it in step with the sea wave above; power take-off units at the membrane's end harvest the internal pressure wave — the device couples to the sea along its whole length through a soft, yielding surface with no rigid moving parts in the water. The flexible membrane system is a membrane 60 metres long and 8 metres wide under a significant wave height of 2.5 metres and energy period 8.5 seconds, with a stated capture ratio on its length, a stated internal strain, and hydraulic take-off efficiency. The flexible membrane's target is the flexible membrane net electrical output by way of the computed wave flux over the membrane's effective capture width at the stated hydraulic efficiency, with bulge volume and membrane strain printed because the elastomer's fatigue life, set by that strain, is the design's consumable. For the flexible membrane, the net output is 294 kilowatts, and the flexible membrane's annual yield is 0.747 gigawatt-hours, at the flexible membrane's capacity factor of 0.29. The effective capture width is 22.8 metres along a 60.0 metre membrane, hydraulic power is 594 kilowatts, and the membrane works at 16.0 percent strain. This design study is computed, not measured: a simulation on stated assumptions for civilian energy supply, with neither targeting nor weapon application involved. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian wave and tidal energy system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-15
DOI
https://doi.org/10.5281/zenodo.24238759
Primary Topic
Wave and Wind Energy Systems
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Design Blueprint: Flexible-Membrane Wave Power: Bulge-Wave Propagation, Hydraulic Take-Off and Capture-Length Budgets

William Alexander Aldred
Zenodo (CERN European Organization for Nuclear Research)
Wave and Wind Energy Systems
article

Design Blueprint: Flexible-Membrane Wave Power: Bulge-Wave Propagation, Hydraulic Take-Off and Capture-Length Budgets

William Alexander Aldred
article en

Abstract

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24238411): The flexible membrane is presented here: a computed flexible membrane design, rated at 294 kilowatts, on the flexible membrane's single stated flexible membrane operating principle: a long, fluid-filled flexible membrane lying along the wave direction develops a bulge wave that travels inside it in step with the sea wave above; power take-off units at the membrane's end harvest the internal pressure wave — the device couples to the sea along its whole length through a soft, yielding surface with no rigid moving parts in the water. The flexible membrane system is a membrane 60 metres long and 8 metres wide under a significant wave height of 2.5 metres and energy period 8.5 seconds, with a stated capture ratio on its length, a stated internal strain, and hydraulic take-off efficiency. The flexible membrane's target is the flexible membrane net electrical output by way of the computed wave flux over the membrane's effective capture width at the stated hydraulic efficiency, with bulge volume and membrane strain printed because the elastomer's fatigue life, set by that strain, is the design's consumable. For the flexible membrane, the net output is 294 kilowatts, and the flexible membrane's annual yield is 0.747 gigawatt-hours, at the flexible membrane's capacity factor of 0.29. The effective capture width is 22.8 metres along a 60.0 metre membrane, hydraulic power is 594 kilowatts, and the membrane works at 16.0 percent strain. This design study is computed, not measured: a simulation on stated assumptions for civilian energy supply, with neither targeting nor weapon application involved. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian wave and tidal energy system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Zenodo (CERN European Organization for Nuclear Research)
Wave and Wind Energy Systems
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon