Controle de nível em tanques interligados utilizando CLP
This article presents the development of an educational bench for automatic water-level control in interconnected tanks using a Programmable Logic Controller (PLC). The objective was to build a small-scale prototype to demonstrate the integration of sensors, a controller, an actuator and visual indicators, applying concepts of industrial automation and process control. The structure consists of two vertically positioned tanks, magnetic float-level sensors installed in the lower tank, a 24 V submersible mini pump, a selector switch, LED indicators and a Delta DVP20SX2 PLC. The operator selects one of two reference levels, 50% or 80% of the lower tank capacity. Water is manually introduced into this tank and, when the selected level is reached, the Ladder-programmed logic commands the pump to transfer water to the upper tank. Functional tests were performed on the sensors, selector switch, pump and visual indicators. According to the project records, the system operated satisfactorily after adjustments to the program and replacement of the initially selected pump. A mechanical overflow was retained as an additional measure to direct excess water. The results indicate that the prototype is suitable as an educational resource for demonstrating ON/OFF closed-loop control; however, no quantitative performance measurements were conducted.
Authors
- Germano Luiz Cardoso
- Kawanny Silva do Valle dos Santos
- Diego Rodrigues
- Daniela Vegas Prates Gonzalez
- Luiz Carlos Gonzalez de Castro
- Andréa Oliveira da Silva
- Leandro de Almeida Sanches
Publication Details
- Journal
- Revista fisio&terapia.
- Published
- 2026-11-15
- DOI
- https://doi.org/10.69849/8xypkx37
- Primary Topic
- Industrial Automation and Control Systems
- Type
- article
- Field-Weighted Citation Impact
- 0.00