The synergistic effect and mechanical properties of a composite support system with a steel‐strand‐reinforced composite steel mesh and a flexible shotcrete layer

Abstract As underground engineering advances to greater depths, the combined effects of increased in situ stress and fractured surrounding rock pose significant challenges to traditional support systems such as bolt–mesh–shotcrete configurations. These systems often lack sufficient deformation compatibility to meet safety support requirements in deep‐buried tunnels. This paper presents an innovative composite support structure comprising a steel‐strand‐reinforced composite steel mesh and a flexible polymer shotcrete layer. Through material‐mechanics tests, full‐scale panel tests, and calibrated three‐dimensional discrete‐element simulations, the synergistic load‐bearing performance and load‐transfer mechanisms of the proposed structure were systematically investigated. Initially, uniaxial compression, axial tension, and sandstone interfacial bonding strength tests were conducted on flexible shotcrete materials with eight different polymer emulsion contents (5%–70%) to determine the optimal material mixture. Next, seven sets of composite support panel models with varying configurations were subjected to static loading tests, with the load distribution monitored using electrical resistance strain gauges. The results show that flexible shotcrete with a 30% emulsion content achieves optimal overall performance, with a compressive strength of 19.74 MPa, tensile strength of 1.78 MPa, and bonding strength of 1.45 MPa. In the composite support tests, the maximum load of the composite system consisting of cement mortar thickness (C), a flexible shotcrete layer (F), and a composite steel mesh (M), designated the C–F–M system, incorporating flexible shotcrete reached 76.10 kN, a 28% increase over the control group (cement mortar–cement mortar–mesh), C–C–M, in which the flexible material was replaced with cement mortar of the same thickness. Additionally, the average residual strength of the C–F–M system was 36.94 kN (approximately 49% of the peak load), reflecting a 54.7% improvement relative to the Group C–C–M, while the maximum displacement increased by 23%. Strain monitoring further confirmed that the C–F–M system outperforms the control system in load distribution uniformity and postpeak structural stability, demonstrating support characteristics that effectively combine high load‐bearing capacity with substantial deformation compatibility. A calibrated three‐dimensional discrete‐element model reproduced the overall experimental load–displacement response and dominant failure characteristics, and parametric simulations identified 30–50 mm as an appropriate flexible shotcrete layer thickness range for balancing bearing capacity and deformation compatibility. Together, the experimental and numerical results indicate that the proposed composite support structure combines high bearing capacity, deformation compatibility, and postpeak stability, thereby providing a quantitative basis for support design in fractured and highly stressed deep rock masses.

Authors

Institutions

Publication Details

Journal
Deep Underground Science and Engineering
Published
2026-11-15
DOI
https://doi.org/10.1002/dug2.70147
Primary Topic
Geomechanics and Mining Engineering
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

The synergistic effect and mechanical properties of a composite support system with a steel‐strand‐reinforced composite steel mesh and a flexible shotcrete layer

Yong Hwan Han, 董凤基, Xianda Feng, Shuchen Li et al.
Deep Underground Science and Engineering
Geomechanics and Mining Engineering
article

The synergistic effect and mechanical properties of a composite support system with a steel‐strand‐reinforced composite steel mesh and a flexible shotcrete layer

Yong Hwan Han, 董凤基, Xianda Feng, Shuchen Li, Hai Liu
article en

Abstract

Abstract As underground engineering advances to greater depths, the combined effects of increased in situ stress and fractured surrounding rock pose significant challenges to traditional support systems such as bolt–mesh–shotcrete configurations. These systems often lack sufficient deformation compatibility to meet safety support requirements in deep‐buried tunnels. This paper presents an innovative composite support structure comprising a steel‐strand‐reinforced composite steel mesh and a flexible polymer shotcrete layer. Through material‐mechanics tests, full‐scale panel tests, and calibrated three‐dimensional discrete‐element simulations, the synergistic load‐bearing performance and load‐transfer mechanisms of the proposed structure were systematically investigated. Initially, uniaxial compression, axial tension, and sandstone interfacial bonding strength tests were conducted on flexible shotcrete materials with eight different polymer emulsion contents (5%–70%) to determine the optimal material mixture. Next, seven sets of composite support panel models with varying configurations were subjected to static loading tests, with the load distribution monitored using electrical resistance strain gauges. The results show that flexible shotcrete with a 30% emulsion content achieves optimal overall performance, with a compressive strength of 19.74 MPa, tensile strength of 1.78 MPa, and bonding strength of 1.45 MPa. In the composite support tests, the maximum load of the composite system consisting of cement mortar thickness (C), a flexible shotcrete layer (F), and a composite steel mesh (M), designated the C–F–M system, incorporating flexible shotcrete reached 76.10 kN, a 28% increase over the control group (cement mortar–cement mortar–mesh), C–C–M, in which the flexible material was replaced with cement mortar of the same thickness. Additionally, the average residual strength of the C–F–M system was 36.94 kN (approximately 49% of the peak load), reflecting a 54.7% improvement relative to the Group C–C–M, while the maximum displacement increased by 23%. Strain monitoring further confirmed that the C–F–M system outperforms the control system in load distribution uniformity and postpeak structural stability, demonstrating support characteristics that effectively combine high load‐bearing capacity with substantial deformation compatibility. A calibrated three‐dimensional discrete‐element model reproduced the overall experimental load–displacement response and dominant failure characteristics, and parametric simulations identified 30–50 mm as an appropriate flexible shotcrete layer thickness range for balancing bearing capacity and deformation compatibility. Together, the experimental and numerical results indicate that the proposed composite support structure combines high bearing capacity, deformation compatibility, and postpeak stability, thereby providing a quantitative basis for support design in fractured and highly stressed deep rock masses.

Deep Underground Science and Engineering
Shandong University (CN), China University of Mining and Technology (CN), University of Jinan (CN)
Geomechanics and Mining Engineering
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon