Theoretical study on the in-plane vertical and rotational coupled vibration of a shield cutter head

During shield tunnelling, cutter head vibration not only affects face stability but also accelerates structural fatigue and cutter wear. To address the coupled vibration effect induced by the combined action of gravity and drive torque, this paper presents a comprehensive theoretical method for analysing the in-plane vertical-rotational coupled vibration response of the shield cutter head. First, the cutter head is modelled as a thin elastic circular plate with clamped edges, which is discretised using the localized radial basis function (LRBF) method, and its free vibration characteristics are obtained via the modified QR algorithm. Second, a two-degree-of-freedom mass-spring-damper model is established to simulate the cutter head system, and a coupling stiffness is introduced to account for the interaction between vertical displacement and rotational angle. Subsequently, the multi-scale perturbation method is applied to separate fast and slow time scales and eliminate secular terms, thereby enabling a reduced-order solution of the coupled vibration equations and yielding the amplitude and phase evolution equations as well as the frequency response functions. Finally, a case study indicates that the vertical-rotational coupling causes a shift in the natural frequencies of the cutter head, resulting in two new coupled frequencies. This frequency splitting is attributed to energy exchange between the vertical and rotational modes: the low-frequency mode is dominated by rotational vibration, whereas the high-frequency mode exhibits stronger modal coupling. Within the assumptions of harmonic excitation and linear coupling, the frequency splitting amount ΔΩ increases nonlinearly with increasing coupling stiffness and cutter head diameter, suggesting that the modal coupling becomes more intensive. Thus, the vertical-rotational coupling effect should be carefully considered for ultra-large diameter shields. Design should prioritise cutter layout optimisation to reduce coupling stiffness, or increase rotational stiffness to separate the natural frequencies, thereby weakening the risk of coupled vibration. This paper elucidates the energy transfer mechanism between the two modes and provides a theoretical basis for vibration control.

Authors

Institutions

Publication Details

Journal
Scientific Reports
Published
2026-11-15
DOI
https://doi.org/10.1038/s41598-026-80742-4
Primary Topic
Vibration and Dynamic Analysis
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Theoretical study on the in-plane vertical and rotational coupled vibration of a shield cutter head

Zhou We, Feicong Zhou, Tao Deng, Ziliang Xie et al.
Scientific Reports
Vibration and Dynamic Analysis
article

Theoretical study on the in-plane vertical and rotational coupled vibration of a shield cutter head

Zhou We, Feicong Zhou, Tao Deng, Ziliang Xie, Kai Cao, Shun Liu, Honghong Yang, Zhiqi Lin
article en

Abstract

During shield tunnelling, cutter head vibration not only affects face stability but also accelerates structural fatigue and cutter wear. To address the coupled vibration effect induced by the combined action of gravity and drive torque, this paper presents a comprehensive theoretical method for analysing the in-plane vertical-rotational coupled vibration response of the shield cutter head. First, the cutter head is modelled as a thin elastic circular plate with clamped edges, which is discretised using the localized radial basis function (LRBF) method, and its free vibration characteristics are obtained via the modified QR algorithm. Second, a two-degree-of-freedom mass-spring-damper model is established to simulate the cutter head system, and a coupling stiffness is introduced to account for the interaction between vertical displacement and rotational angle. Subsequently, the multi-scale perturbation method is applied to separate fast and slow time scales and eliminate secular terms, thereby enabling a reduced-order solution of the coupled vibration equations and yielding the amplitude and phase evolution equations as well as the frequency response functions. Finally, a case study indicates that the vertical-rotational coupling causes a shift in the natural frequencies of the cutter head, resulting in two new coupled frequencies. This frequency splitting is attributed to energy exchange between the vertical and rotational modes: the low-frequency mode is dominated by rotational vibration, whereas the high-frequency mode exhibits stronger modal coupling. Within the assumptions of harmonic excitation and linear coupling, the frequency splitting amount ΔΩ increases nonlinearly with increasing coupling stiffness and cutter head diameter, suggesting that the modal coupling becomes more intensive. Thus, the vertical-rotational coupling effect should be carefully considered for ultra-large diameter shields. Design should prioritise cutter layout optimisation to reduce coupling stiffness, or increase rotational stiffness to separate the natural frequencies, thereby weakening the risk of coupled vibration. This paper elucidates the energy transfer mechanism between the two modes and provides a theoretical basis for vibration control.

Scientific Reports
Tongji University (CN), Fuzhou University (CN)
Vibration and Dynamic Analysis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon