Soil‐specific correlations between vertical electrical sounding, cone penetration test and multichannel analysis of surface waves for Quaternary alluvium
Abstract The integration of electrical resistivity ( ρ ) from vertical electrical sounding, cone penetration test (CPT) parameters and shear‐wave velocity ( V s ) from multichannel analysis of surface waves provides a comprehensive approach to soil characterization. However, direct empirical correlations linking these three geotechnical and geophysical parameters remain limited in the literature. This study addresses this gap by developing soil‐specific correlation models for Quaternary alluvial deposits at the IIT Patna campus in the Indo‐Gangetic Plain, characterized by significant subsurface heterogeneity with sand, sand mixtures and silt mixtures as the dominant soil types. A power–law relationship between electrical resistivity and CPT parameters (cone tip resistance and frictional ratio) was established through regression analysis on 196 paired data points. Soil behaviour type index ( I c )‐based correlations were developed, showing that sandy soils exhibited a coefficient of determination ( R 2 ) of 0.580, sand mixtures an R 2 of 0.707, whereas the combined model for all soil types achieved an R 2 of 0.902, indicating strong predictive capability for the combined soil dataset. To quantify the uncertainty in the proposed model, 95% prediction bounds were constructed based on the residual variability of the fit, providing an interval within which individual observations are expected to lie with high confidence. Additionally, a second model linking V s and ρ was developed with an R 2 of 0.832, indicating strong predictive capability. Statistical consistency between measured and predicted values was evaluated using the non‐parametric Mann–Whitney U test. The results indicate good agreement for sands, sand mixtures, the combined soil dataset and the V s correlation ( p > 0.05), whereas the silt model shows significant differences. These correlations provide a rapid, cost‐effective estimation of geotechnical properties from resistivity measurements, substantially reducing dependence on extensive in situ testing while enhancing data reliability in geotechnical site characterization.
Authors
- Pradipta Chakrabortty (ORCID: https://orcid.org/0000-0002-8852-2596)
- P. K. Mishra (ORCID: https://orcid.org/0000-0003-0370-4276)
- Suraj Appaso Patil
Institutions
- Indian Institute of Technology Patna (IN)
Publication Details
- Journal
- Near Surface Geophysics
- Published
- 2026-11-15
- DOI
- https://doi.org/10.1002/nsg.70095
- Primary Topic
- Geotechnical Engineering and Soil Mechanics
- Type
- article
- Field-Weighted Citation Impact
- 0.00