Ice Crushing Force on a River Bridge Pier: Korzhavin and Effective-Pressure Estimates Against the Measured Force Record
Every spring, the piers of northern river bridges are struck by the winter they supported, and the force of that blow is one of the oldest design questions in cold-regions engineering. This paper evaluates the classical Korzhavin crushing formula for a representative river pier — 3 metres wide, meeting ice 1.1 metres thick with a crushing strength of 1.5 megapascals — and sets the answer beside an effective-pressure code formulation and the range of forces actually measured on instrumented river piers. Korzhavin's product of indentation, shape and contact factors gives 3.1 meganewtons, an average pressure of 0.95 megapascals over the contact face. The effective-pressure form gives 2.9 meganewtons. Published measurements compiled in the CRREL ice force database for river piers cluster in the low single meganewtons for ice of this thickness, so both estimates land inside the measured family, Korzhavin toward its upper-middle, the code form toward its middle. The momentum flux of the arriving sheet, by contrast, is only 12 kilonewtons — two orders below the crushing force — proving that the pier's enemy is not the ice's motion but its strength: the sheet arrives slowly and then simply refuses, with meganewtons of refusal, to get out of the way. Temperature swings the answer widely, from 1.9 meganewtons for ice near melting to 4.6 for ice at minus ten degrees, which is why the coldest breakup, not the fastest, is often the pier's worst day.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-15
- DOI
- https://doi.org/10.5281/zenodo.24248612
- Primary Topic
- Hydraulic flow and structures
- Type
- article
- Field-Weighted Citation Impact
- 0.00