Line-Moment Translation Refinement for Prescribed-Orientation Flank Milling of Ruled Surfaces

Five-axis flank-milling workflows commonly prescribe cutter-axis orientation before the translation path is fully fixed. We formulate the remaining problem as a convex prior-relative translation refinement in Plücker line moments, retaining the supplied orientation and using the cutter-location path as a prior for an endpoint-safe translation correction. The line-moment residual is proved to equal transverse directed-line displacement and therefore removes the physically irrelevant along-axis gauge that direct point fitting overconstrains. The finite-basis, quadrature-discretized formulation yields one symmetric positive-definite solve, ruling-family observability constants, noise and approximation bounds, an independently computable irreducible transverse floor, an exact orientation-relaxed lower bound, and exact centroid compression of the discrete system. Controlled tests verify exact recovery, nondevelopable and orientation-induced floors, and the predicted stability. Across 16 parametric turbomachinery blades and three cutter-positioning priors, median total transverse-error reductions are 12.6% for single-point offset, 26.7% for a locally optimized one-angle prior, and 3.2% for double-point offset; 67–73% of the translation-dependent component is removed. A smooth joint orientation–translation ablation confirms the resulting regime map: allowing orientation changes yields an additional 24–46% reduction for single-point-offset cases but only 2–5% for double-point offset. On the reference impeller, transverse error decreases by 46.2% and assigned-pose cylinder radial RMS decreases from 64.4 to 16.6 μm. Centroid compression preserves the discrete normal equations and removes repeated spanwise accumulation from assembly, and a non-flank line-bundle test confirms that the inverse formulation is not cutter-specific. This record contains the LM manuscript and supplemental material v005, with computational reproducibility archive v004 (licensing revision v001). The v005 revision updates presentation and availability information only; experiments and numerical results are unchanged. The archive includes experiment scripts, numerical evidence, and SHA-256 manifests. This is an author preprint, not a peer-reviewed publication. License scope: the manuscript, supplement, LM documentation and research data are CC BY 4.0. Original LM software is Apache-2.0. These licenses apply to different components, not as a choice of license for the entire record. Third-party rights and notices, including ParaturboCAD attribution, remain in force. The archive contains LICENSE-SCOPE.md, NOTICE, THIRD_PARTY_NOTICES.md, license texts and a file-level inventory. Licensing revision v001 leaves all scientific code, numerical results and historical archives unchanged.

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-15
DOI
https://doi.org/10.5281/zenodo.24246966
Primary Topic
Advanced Numerical Analysis Techniques
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Line-Moment Translation Refinement for Prescribed-Orientation Flank Milling of Ruled Surfaces

Stavros G. Papageorgiou
Zenodo (CERN European Organization for Nuclear Research)
Advanced Numerical Analysis Techniques
preprint

Line-Moment Translation Refinement for Prescribed-Orientation Flank Milling of Ruled Surfaces

Stavros G. Papageorgiou
preprint en

Abstract

Five-axis flank-milling workflows commonly prescribe cutter-axis orientation before the translation path is fully fixed. We formulate the remaining problem as a convex prior-relative translation refinement in Plücker line moments, retaining the supplied orientation and using the cutter-location path as a prior for an endpoint-safe translation correction. The line-moment residual is proved to equal transverse directed-line displacement and therefore removes the physically irrelevant along-axis gauge that direct point fitting overconstrains. The finite-basis, quadrature-discretized formulation yields one symmetric positive-definite solve, ruling-family observability constants, noise and approximation bounds, an independently computable irreducible transverse floor, an exact orientation-relaxed lower bound, and exact centroid compression of the discrete system. Controlled tests verify exact recovery, nondevelopable and orientation-induced floors, and the predicted stability. Across 16 parametric turbomachinery blades and three cutter-positioning priors, median total transverse-error reductions are 12.6% for single-point offset, 26.7% for a locally optimized one-angle prior, and 3.2% for double-point offset; 67–73% of the translation-dependent component is removed. A smooth joint orientation–translation ablation confirms the resulting regime map: allowing orientation changes yields an additional 24–46% reduction for single-point-offset cases but only 2–5% for double-point offset. On the reference impeller, transverse error decreases by 46.2% and assigned-pose cylinder radial RMS decreases from 64.4 to 16.6 μm. Centroid compression preserves the discrete normal equations and removes repeated spanwise accumulation from assembly, and a non-flank line-bundle test confirms that the inverse formulation is not cutter-specific. This record contains the LM manuscript and supplemental material v005, with computational reproducibility archive v004 (licensing revision v001). The v005 revision updates presentation and availability information only; experiments and numerical results are unchanged. The archive includes experiment scripts, numerical evidence, and SHA-256 manifests. This is an author preprint, not a peer-reviewed publication. License scope: the manuscript, supplement, LM documentation and research data are CC BY 4.0. Original LM software is Apache-2.0. These licenses apply to different components, not as a choice of license for the entire record. Third-party rights and notices, including ParaturboCAD attribution, remain in force. The archive contains LICENSE-SCOPE.md, NOTICE, THIRD_PARTY_NOTICES.md, license texts and a file-level inventory. Licensing revision v001 leaves all scientific code, numerical results and historical archives unchanged.

Zenodo (CERN European Organization for Nuclear Research)
Advanced Numerical Analysis Techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon