Comparative Analysis of International Standards Governing Inter-Tank Spacing Requirements Between Atmospheric Crude Oil Storage Tanks
Above-Ground Storage Tanks (ASTs) represent one of the largest fire and explosion hazards in the crude oil supply chain. While extensive historical data is available for crude oil terminals, international standards diverge in their recommendations regarding tank spacing requirements; some standards use formula-based rules, some follow flash-point criteria, and others use probabilistic methods, but all with contrasting approaches. To address this divergence, this article provides the first comprehensive comparison of the seven most recognized standards, including API 650/API 2000 (USA), NFPA 30 (USA), EN 14015 (Europe), OISD STD 118 (India), AS 1940:2017 (Australia), UK HSE/IP Model Code of Practice Part 2, and AXA XL Global Asset Protection (CCPS Risk-Based Spacing Guidelines). The parameters assessed include shell-to-shell separation formulae; criteria for high and low flash points; different dike/bund sizing approaches; the maximum number of tanks permitted for a given containment area; different approaches to radiant heat calculations; and, finally, the lack of harmonization in calculation methods. To compare the standards practically, numerical computations of spacing requirements are presented for tanks of various diameters, viz. 30 m, 60 m, and 90 m. The results of this research will support the design of crude oil terminals and tank farms.
Authors
- Mandira Agarwal Chandra Sekhar Mandal
Publication Details
- Journal
- Journal of chemical health risks
- Published
- 2026-11-13
- Primary Topic
- Risk and Safety Analysis
- Type
- article
- Field-Weighted Citation Impact
- 0.00