OPTIMIZATION OF FEED PARTICLE SIZE IN THE LOW INTENSITY MAGNETIC SEPARATOR (LIMS) PROCESS TO MAXIMIZE THE FE GRADE OF IRON ORE CONCENTRATE USING THE TAGUCHI METHOD AT PT. ADT/SJU SITE TALIABU
This study aims to analyze the effects of feed particle size and feed Fe content on the Fe grade of the concentrate produced by the Low Intensity Magnetic Separator (LIMS) process and to determine the optimal operating parameters using the Taguchi method with the Nominal-is-Best quality characteristic. A quantitative approach was employed using a Taguchi experimental design based on an L9 (3²) Orthogonal Array, with three replications for each treatment combination. Two factors were investigated: feed particle size at three levels (−100 mesh, −150 mesh, and −200 mesh) and feed Fe content at three levels (42%, 44%, and 46%). Data analysis included the calculation of means, variances, Signal-to-Noise (S/N) Ratios, Response Tables, Main Effect Plots, and Analysis of Variance (ANOVA). The ANOVA results revealed that feed particle size had a statistically significant effect on concentrate Fe grade, with an F-value of 368.646 and a significance level of p < 0.001. feed Fe content significantly influenced concentrate Fe grade, with an F-value of 4.603 and a p-value of 0.024 (p < 0.05). However, the interaction between feed particle size and feed Fe content was not statistically significant (p = 0.926 > 0.05). Feed particle size was identified as the most dominant factor, as indicated by the highest S/N Ratio Delta value of 1.24 dB. Based on the Response Table and Main Effect Plot, the combination of a feed particle size of −200 mesh and a feed Fe content of 44% produced the highest S/N Ratio, indicating the most stable process conditions. Therefore, the optimal operating parameters for the LIMS process were determined to be a feed particle size of −200 mesh and a feed Fe content of 44%. These findings demonstrate that controlling feed particle size is a critical factor in achieving an optimal and consistent Fe grade in the concentrate.
Authors
- Nurhayati Rauf (ORCID: https://orcid.org/0000-0002-5017-1874)
- Rahmat Awaluddin
- Anis Saleh
Publication Details
- Journal
- Journal of Industrial Engineering Management
- Published
- 2026-11-13
- Primary Topic
- Mineral Processing and Grinding
- Type
- article
- Field-Weighted Citation Impact
- 0.00