Tailoring Silane Chemistry for Engineering Multifunctional Cationic Titanium Implant Surfaces
Abstract Silane-mediated cationic functionalization has emerged as a promising strategy for improving the performance of titanium (Ti) implants. However, the limitations of conventional aminosilane coatings highlight the need for alternative silane precursors that maintain electrochemical protection, while enhancing biological compatibility. Here, silane chemistry was tailored by functionalizing Ti surfaces with 3-glycidoxypropyltrimethoxysilane (GPTMS) and tetraethyl-orthosilicate (TEOS) through sol-gel silanization, using plasma electrolytic oxidation (PEO) to generate a hydroxyl-rich interfacial layer for silane anchoring. Surface characterization confirmed the successful formation of GPTMS- and TEOS-derived siloxane networks, resulting in enhanced surface charge, wettability, and modified tribological behavior. Electrochemical analyses demonstrated significantly improved corrosion resistance compared with untreated Ti and PEO-treated surfaces, with TEOS exhibiting the highest electrochemical stability. Microbiological assays against Gram-positive and Gram-negative bacteria revealed reduced bacterial adhesion and biofilm formation, accompanied by increased bacterial membrane damage, particularly on TEOS-functionalized surfaces. Cytocompatibility assays using human mesenchymal stem cells (hMSCs) demonstrated enhanced metabolic activity and proliferation following silanization, with TEOS-treated surfaces exhibiting the most favorable response after 8 days. Overall, tailoring silane chemistry using GPTMS and TEOS enabled the engineering of multifunctional Ti surfaces with improved tribological and electrochemical performance, reduced bacterial colonization, and enhanced cellular responses, highlighting the potential of alternative silane precursors for the development of next-generation implant surfaces.
Authors
- Renato Goulart Jasinevicius (ORCID: https://orcid.org/0000-0001-8229-8098)
- Jean Géringer (ORCID: https://orcid.org/0000-0002-4843-2844)
- Valentim Adelino Ricardo Barão (ORCID: https://orcid.org/0000-0002-6391-9917)
- Carlos Alberto Fortulan (ORCID: https://orcid.org/0000-0002-2259-9910)
- Nilson Cristino da Cruz (ORCID: https://orcid.org/0000-0002-0354-3890)
- Elidiane Cipriano Rangel (ORCID: https://orcid.org/0000-0001-7909-190X)
- João Pedro dos S. Silva
- Daniela B. A. de Castro
- Cátia Sufia Alves F. de Andrade
- Maria Helena R. Borges
- Thais Terumi S. Takeda
Institutions
- Université Claude Bernard Lyon 1 (FR)
- Inserm (FR)
- Universidade Estadual de Campinas (UNICAMP) (BR)
- Institute of Physics (PL)
- Saveetha University (IN)
- Université Jean Monnet (FR)
- Universidade Estadual Paulista (Unesp) (BR)
Publication Details
- Journal
- ACS Applied Bio Materials
- Published
- 2026-11-14
- DOI
- https://doi.org/10.1021/acsabm.6c01502
- Primary Topic
- Surface Treatment and Coatings
- Type
- article
- Field-Weighted Citation Impact
- 0.00