Stability analysis of Marangoni magnetoconvection on a composite layer with temperature gradients and heat source
We can further enhancement of the thermal of the both region in the inclusion of a thermal profile effect. This theoretically studies the stability of Darcy-Brinkman magneto-Marangoni convection by the thermal gradient, and internal heat generation/absorption dual layers of heat generation/absorption in dual layers. The dual-layer models subjected to uniform and non-uniform temperature gradients are modelled. The eigenvalues of the thermal Marangoni (TM) numbers of the two-layer system are obtained, consisting of fluid free surface boundary conditions relating to surface tension driven velocity condition. The flow regime of the resulting flow is controlled by variations in viscous stress, contributions from viscous dissipation, and Marangoni convection. A uniform magnetic field is applied normal to the direction of flow, and its influence on the magnetoconvection within the layered medium is studied. We use temperature-gradient-based overall thermal conditions at the interfaces rather than the conventional isothermal—isothermal boundaries used in previous workers. Based on use of the similarity variable to transform differential equations to non-dimensional forms and then exact solutions are found of the equations. It is concluded from this study that as the values of the magnetic parameter, viscosity ratio, and wavenumber parameter decrease, flow change increases, but it increases when the temperature profile increases. An analysis is carried out on the effects of any sink to source CIR (corrected internal Rayleigh) numbers on the stability of the system. It is nice to see the results about the effect of the porous parameter and vertical magnetic field. The neutral stability curves indicate that the thermal Marangoni number is largely influenced by the magnitude of the temperature difference as well as the thermal properties of the porous-fluid system. Designed to be useful in the same practical areas such as crystal growth, semiconductor manufacturing, more fluidic systems, welding, additive manufacturing, and thermal management.
Authors
- Narayanappa Manjunatha (ORCID: https://orcid.org/0000-0002-7076-7122)
- Emad Hassan Aly (ORCID: https://orcid.org/0000-0001-7432-193X)
- Avula Sreevallabha Reddy
- S. Shali
- S. Vijayakumar Varma
Institutions
- Ain Shams University (EG)
- Ramaiah Institute of Technology (IN)
- Amrita Vishwa Vidyapeetham (IN)
- REVA University (IN)
Publication Details
- Journal
- Discover Fluid Mechanics
- Published
- 2026-11-14
- DOI
- https://doi.org/10.1007/s44369-026-00022-6
- Primary Topic
- Heat and Mass Transfer in Porous Media
- Type
- article
- Field-Weighted Citation Impact
- 0.00