Preparation of Nano-Hydroxyapatite Loaded Coal Gasification Slag and Its Application for the Removal of Pb(II), Cu(II), and Cd(II) from Lead–Zinc Mining Wastewater
Abstract To address the disposal challenges of coal gasification slag (CGS), this study loaded nanohydroxyapatite (nHAP) onto CGS to prepare a composite material (nHAP-CGS). Preparation conditions including CGS particle size, calcium-to-phosphorus (Ca/P) molar ratio, and water bath time were optimized via response surface methodology. The optimal parameters were determined as 0.075–0.125 mm, 1.67, and 24 h, respectively. Characterization results showed that nano-HAP was uniformly dispersed on the surface and pores of CGS, increasing the specific surface area from 1.092 to 57.65 m2/g and significantly enhancing surface active sites. Dynamic column experiments demonstrated that nHAP-CGS exhibited markedly superior removal efficiencies for Pb(II), Cu(II), and Cd(II), as well as higher effluent pH, compared to raw CGS. This study confirms the feasibility and advantages of nHAP-CGS, providing a technical reference for the resource utilization of CGS.
Authors
- Xuying Guo (ORCID: https://orcid.org/0000-0002-2005-5418)
- Haoran Sun (ORCID: https://orcid.org/0000-0003-4642-1110)
- Yanrong Dong (ORCID: https://orcid.org/0000-0002-7424-1929)
- Xiaoyue Zhang (ORCID: https://orcid.org/0009-0005-5347-0852)
Institutions
- Liaoning Technical University (CN)
Publication Details
- Journal
- Industrial & Engineering Chemistry Research
- Published
- 2026-11-14
- DOI
- https://doi.org/10.1021/acs.iecr.6c03694
- Primary Topic
- Adsorption and biosorption for pollutant removal
- Type
- article
- Field-Weighted Citation Impact
- 0.00