Design Blueprint: A 72 Metre Starshade with Laser-Guide Formation Flying and a Four-Metre Telescope: Suppression and Ranging Budgets

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24225479): This paper presents a computed design study of a direct-imaging exoplanet observatory on a single stated operating principle: a large petal-profiled occulter 124,000 kilometres ahead of the telescope holds the telescope inside its engineered shadow, with a laser beacon on the shade and a sensor on the telescope measuring the lateral offset continuously so the formation is flown actively rather than ballistically. The system is a 72 metre diameter starshade at 124,000 kilometres separation from a 4.0 metre telescope, sized for the smallest habitable zones of the nearest stars and for a long target list. The design target is an Earth-size planet in the habitable zone of a star 6 parsecs away, where the zone's angular size demands the smaller inner working angle the larger shade provides. The resolution element is 30.9 milliarcseconds; the inner working angle is 59.9 milliarcseconds and the outer working angle 1238 milliarcseconds. The planet delivers 1.12e-1 detected photons per second against a total background and noise variance rate of 6.49e-1, dominated by exozodiacal and zodiacal background, giving an exposure of 22 minutes to reach signal-to-noise 5. The wavefront stability allocation of 200 picometres rms corresponds to a contrast floor of 4.39e-6, and the adopted residual contrast is 1.00e-11. This is a computed study with a civilian astronomy purpose and no targeting or weapon application. The observatory exists on paper to measure the light of planets around other stars, and every budget in it — diffraction, photon statistics, thermal emission, formation flying — is an astronomy budget. All figures are simulated from the stated assumptions, not measured. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian direct-imaging exoplanet observatory system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-14
DOI
https://doi.org/10.5281/zenodo.24225742
Primary Topic
Adaptive optics and wavefront sensing
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Design Blueprint: A 72 Metre Starshade with Laser-Guide Formation Flying and a Four-Metre Telescope: Suppression and Ranging Budgets

William Alexander Aldred
Zenodo (CERN European Organization for Nuclear Research)
Adaptive optics and wavefront sensing
article

Design Blueprint: A 72 Metre Starshade with Laser-Guide Formation Flying and a Four-Metre Telescope: Suppression and Ranging Budgets

William Alexander Aldred
article en

Abstract

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24225479): This paper presents a computed design study of a direct-imaging exoplanet observatory on a single stated operating principle: a large petal-profiled occulter 124,000 kilometres ahead of the telescope holds the telescope inside its engineered shadow, with a laser beacon on the shade and a sensor on the telescope measuring the lateral offset continuously so the formation is flown actively rather than ballistically. The system is a 72 metre diameter starshade at 124,000 kilometres separation from a 4.0 metre telescope, sized for the smallest habitable zones of the nearest stars and for a long target list. The design target is an Earth-size planet in the habitable zone of a star 6 parsecs away, where the zone's angular size demands the smaller inner working angle the larger shade provides. The resolution element is 30.9 milliarcseconds; the inner working angle is 59.9 milliarcseconds and the outer working angle 1238 milliarcseconds. The planet delivers 1.12e-1 detected photons per second against a total background and noise variance rate of 6.49e-1, dominated by exozodiacal and zodiacal background, giving an exposure of 22 minutes to reach signal-to-noise 5. The wavefront stability allocation of 200 picometres rms corresponds to a contrast floor of 4.39e-6, and the adopted residual contrast is 1.00e-11. This is a computed study with a civilian astronomy purpose and no targeting or weapon application. The observatory exists on paper to measure the light of planets around other stars, and every budget in it — diffraction, photon statistics, thermal emission, formation flying — is an astronomy budget. All figures are simulated from the stated assumptions, not measured. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian direct-imaging exoplanet observatory system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Zenodo (CERN European Organization for Nuclear Research)
Adaptive optics and wavefront sensing
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon