Numerical Investigation of Near‐Field Similarity Relations Between Hydrogen and Helium Leakage Jets Based on Core Length

ABSTRACT Hydrogen is considered an important energy carrier in future low‐carbon energy systems. However, its high diffusivity and flammability pose significant challenges for experimental studies of leakage safety. Because direct high‐pressure hydrogen leakage experiments involve substantial safety risks, helium is commonly used as a surrogate gas in hydrogen leakage and dispersion experiments. Nevertheless, differences in density, molecular weight, and buoyancy characteristics between hydrogen and helium may contribute to different concentration attenuation behaviors in the near‐field jet region, potentially leading to deviations in surrogate‐based experimental results. In this study, a three‐dimensional computational fluid dynamics (CFD) model was established to investigate the near‐field free‐jet dispersion characteristics of hydrogen and helium under different leakage pressures. The centerline concentration distributions and jet core lengths of the two gases were systematically compared. The results indicate that, within the pressure range of 0.2–1.5 MPa, the normalized centerline mole‐fraction profiles of each gas exhibit only minor variations with leakage pressure, although systematic differences remain between hydrogen and helium. When the jet core length is defined as the axial distance at which the normalized centerline mole fraction falls to 0.95, the core length of hydrogen is consistently greater than that of helium, with the length ratio ranging from 1.18 to 1.21. Based on the core‐length ratios obtained under the four leakage pressure conditions, a unified conversion relationship between hydrogen and helium was established, and a representative conversion factor of 1.20 was adopted. This relationship provides a quantitative approach for estimating the hydrogen jet core length from the corresponding helium core length under the investigated free‐jet configuration and pressure range, offering a practical correction method for helium‐surrogate studies of hydrogen leakage.

Authors

Institutions

Publication Details

Journal
Safety Science and Technology
Published
2026-11-14
DOI
https://doi.org/10.1002/sst3.70073
Primary Topic
Combustion and Detonation Processes
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Numerical Investigation of Near‐Field Similarity Relations Between Hydrogen and Helium Leakage Jets Based on Core Length

Tan Wu, Xiaolei Gao, 帅奇 张, Tianshui Liang et al.
Safety Science and Technology
Combustion and Detonation Processes
article

Numerical Investigation of Near‐Field Similarity Relations Between Hydrogen and Helium Leakage Jets Based on Core Length

Tan Wu, Xiaolei Gao, 帅奇 张, Tianshui Liang, Jiawang Zhang
article en

Abstract

ABSTRACT Hydrogen is considered an important energy carrier in future low‐carbon energy systems. However, its high diffusivity and flammability pose significant challenges for experimental studies of leakage safety. Because direct high‐pressure hydrogen leakage experiments involve substantial safety risks, helium is commonly used as a surrogate gas in hydrogen leakage and dispersion experiments. Nevertheless, differences in density, molecular weight, and buoyancy characteristics between hydrogen and helium may contribute to different concentration attenuation behaviors in the near‐field jet region, potentially leading to deviations in surrogate‐based experimental results. In this study, a three‐dimensional computational fluid dynamics (CFD) model was established to investigate the near‐field free‐jet dispersion characteristics of hydrogen and helium under different leakage pressures. The centerline concentration distributions and jet core lengths of the two gases were systematically compared. The results indicate that, within the pressure range of 0.2–1.5 MPa, the normalized centerline mole‐fraction profiles of each gas exhibit only minor variations with leakage pressure, although systematic differences remain between hydrogen and helium. When the jet core length is defined as the axial distance at which the normalized centerline mole fraction falls to 0.95, the core length of hydrogen is consistently greater than that of helium, with the length ratio ranging from 1.18 to 1.21. Based on the core‐length ratios obtained under the four leakage pressure conditions, a unified conversion relationship between hydrogen and helium was established, and a representative conversion factor of 1.20 was adopted. This relationship provides a quantitative approach for estimating the hydrogen jet core length from the corresponding helium core length under the investigated free‐jet configuration and pressure range, offering a practical correction method for helium‐surrogate studies of hydrogen leakage.

Safety Science and Technology
Zhengzhou University of Light Industry (CN), Zhengzhou University (CN)
Combustion and Detonation Processes
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon