Innovative design of a power transmission system for a multi-function machine tool
This study presents the design, analysis, and validation of a compact power transmission system for a multifunctional tabletop CNC machine capable of performing turning, drilling, and milling operations using a single motor. Three distinct gear cases are used in this study and are clearly distinguished throughout: the proposed transmission design (pinion 18 teeth/gear 51 teeth, module 6 mm), a replicated reference case used solely to benchmark the contact-stress methodology (“Case B”: 20 teeth/20 teeth, module 4 mm), and a design-sizing calculation (23/92 teeth, module 3 mm) used to determine the module and face width of the actual gear train. Spur gear design for the proposed transmission was carried out using AGMA and Lewis equations and validated through Finite Element Analysis (FEA) in ANSYS. The analytical bending stress of the pinion was 31.38 MPa, closely matching the FEA result of 31.11 MPa, while the gear exhibited analytical and FEA stresses of 23.51 MPa and 21.14 MPa, respectively. For the Case B reference study, contact stress analysis based on ISO 6336–2:2006 produced an analytical value of 1302.34 MPa, compared with 1274.1 MPa from FEA, showing a deviation of approximately 2.2%. Parametric analysis demonstrated that increasing the face width from 20 to 30 mm reduced bending stress from 275.95 MPa to 183.96 MPa and improved the factor of safety from 5.89 to 9.30. A functional prototype integrating turning, drilling, and milling operations was successfully developed. The single-motor transmission architecture is expected to reduce energy consumption relative to separate single-purpose machines, and results in a compact machine design; this expectation is design-based rather than measured, as no efficiency measurements were recorded on the fabricated prototype. The proposed methodology confirms that analytical design combined with FEA provides a reliable framework for developing high-performance multifunctional CNC systems suitable for modern precision manufacturing.
Authors
- Pongthep Poungthong (ORCID: https://orcid.org/0000-0002-5278-5984)
- Xu Yong
- B. Ashwini Kumar
- S. Srinivasa Rao
- G. Murali
Institutions
- Hechi University (CN)
- Koneru Lakshmaiah Education Foundation (IN)
- King Mongkut's Institute of Technology Ladkrabang (TH)
Publication Details
- Journal
- Scientific Reports
- Published
- 2026-11-14
- DOI
- https://doi.org/10.1038/s41598-026-76030-w
- Primary Topic
- Gear and Bearing Dynamics Analysis
- Type
- article
- Field-Weighted Citation Impact
- 0.00