Tailoring cross-sectional topology and material distribution for coordinated folding and load transfer in foam-filled dual-tube absorbers
In lattice-constrained auxetic tubes, inward folding compresses a continuous foam core. The core stabilizes the wall, but stronger restraint raises force and advances densification. This coupling limits control of stability and energy absorption. To reorganize it, this study introduces a sea-urchin-inspired dual-tube absorber. A reentrant lattice restrains outward buckling, while a concentric inner tube divides the core into annular and central domains. The divided core requires the outer and inner tubes to deform and transfer load cooperatively. Foam filling and internal stiffening were therefore introduced to regulate outer-tube deformation, foam participation, and inter-tube load transfer. Quasi-static tests and validated simulations compared annular and full foam filling and X-shaped and cruciform stiffeners against a foam-filled single-tube baseline. The annular-foam design delayed densification and increased specific energy absorption (SEA) by 8.3% over full filling. The cruciform-stiffened design increased SEA by 13.4% over the X-stiffened design. Under area-equivalent, reduced-foam simulations, the annular-foam design increased SEA by 21.0% relative to baseline, while the cruciform-stiffened design reduced initial peak force by 12.26%. Finally, optimization identified 0.71 mm stiffeners and a 0.60 mm vertical beam. These results show that core partitioning coordinates foam participation with folding and inter-tube load transfer under controlled material use.
Authors
- Feng-Ling Bao
- Peng Qiu (ORCID: https://orcid.org/0009-0000-1269-7608)
- Xiao-Yi Zhou
- Zhao Cheng
- Bo Yu
- Gao Liu
- Jie-Fa Ding
Publication Details
- Journal
- Figshare
- Published
- 2026-11-14
- DOI
- https://doi.org/10.6084/m9.figshare.35012446
- Primary Topic
- Cellular and Composite Structures
- Type
- article
- Field-Weighted Citation Impact
- 0.00