Design Blueprint: Closed-Loop Conductive Geothermal Power: Rock-Conduction Heat Supply, Wellbore Heat Transfer and Surface Conversion Budgets

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24234908): This paper presents a computed design study of a geothermal energy system on a single stated operating principle: a sealed wellbore circulates its own working fluid down and back up without ever contacting the formation — heat arrives only by conduction through the rock and the well wall — so the system works in rock with no permeability, no water and no fracture network, and produces nothing that needs disposal. The system is two sealed coaxial wells of 5,000 metres depth in rock with a geothermal gradient of 55 kelvin per kilometre and thermal conductivity 2.8 watts per metre-kelvin, each circulating 12 kilograms per second injected at 40 degrees Celsius, feeding a shared binary unit condensing at 35 degrees Celsius. The design target is the conductive heat supply per well from the stated gradient, conductivity and thermal-influence radius, the resulting wellhead temperature, and the net electrical output of the surface unit — printed so the closed loop's rate limit is a number, not an impression. The net electrical output is 0.162 megawatts from a produced flow of 24.0 kilograms per second, a net conversion efficiency of 4.16 percent of the extracted thermal power of 3.9 megawatts, and an annual electricity production of 1.31 gigawatt-hours at the stated capacity factor. The purpose throughout is civilian energy supply: electricity for grids and facilities, or heat for buildings, food production and industry. Nothing in the design is optimized for any other use, and the study has no targeting or weapon application. It is a computed study; every performance figure is simulated from the stated assumptions, not measured. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian geothermal energy system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-15
DOI
https://doi.org/10.5281/zenodo.24235317
Primary Topic
Geothermal Energy Systems and Applications
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Design Blueprint: Closed-Loop Conductive Geothermal Power: Rock-Conduction Heat Supply, Wellbore Heat Transfer and Surface Conversion Budgets

William Alexander Aldred
Zenodo (CERN European Organization for Nuclear Research)
Geothermal Energy Systems and Applications
article

Design Blueprint: Closed-Loop Conductive Geothermal Power: Rock-Conduction Heat Supply, Wellbore Heat Transfer and Surface Conversion Budgets

William Alexander Aldred
article en

Abstract

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24234908): This paper presents a computed design study of a geothermal energy system on a single stated operating principle: a sealed wellbore circulates its own working fluid down and back up without ever contacting the formation — heat arrives only by conduction through the rock and the well wall — so the system works in rock with no permeability, no water and no fracture network, and produces nothing that needs disposal. The system is two sealed coaxial wells of 5,000 metres depth in rock with a geothermal gradient of 55 kelvin per kilometre and thermal conductivity 2.8 watts per metre-kelvin, each circulating 12 kilograms per second injected at 40 degrees Celsius, feeding a shared binary unit condensing at 35 degrees Celsius. The design target is the conductive heat supply per well from the stated gradient, conductivity and thermal-influence radius, the resulting wellhead temperature, and the net electrical output of the surface unit — printed so the closed loop's rate limit is a number, not an impression. The net electrical output is 0.162 megawatts from a produced flow of 24.0 kilograms per second, a net conversion efficiency of 4.16 percent of the extracted thermal power of 3.9 megawatts, and an annual electricity production of 1.31 gigawatt-hours at the stated capacity factor. The purpose throughout is civilian energy supply: electricity for grids and facilities, or heat for buildings, food production and industry. Nothing in the design is optimized for any other use, and the study has no targeting or weapon application. It is a computed study; every performance figure is simulated from the stated assumptions, not measured. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian geothermal energy system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Zenodo (CERN European Organization for Nuclear Research)
Geothermal Energy Systems and Applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon