Knee joint biomechanical characteristics of table tennis players based on inertial sensing technology: impact on LESS-defined risk stratification for anterior cruciate ligament injury

To explore the feasibility of evaluating dynamic knee joint biomechanical characteristics in table tennis players using inertial measurement units (IMUs), and to identify sensitive biomechanical indicators associated with LESS-defined ACL injury risk stratification. We recruited 68 s level and above table tennis players and used the Landing Error Scoring System (LESS) to assess LESS-based ACL injury risk stratification. Those with a score ≥ 5 are included in the high-risk group, and those with a score < 5 are included in the low-risk group. All athletes wear IMU sensors to complete four tasks: fixed-point forehand attack, backhand push, lateral spin, and step-stop task, collecting data on knee joint flexion and extension angles, valgus angles, three-axis acceleration, and angular velocity. Single factor repeated measures analysis of variance (RM-ANOVA) was used to compare the biomechanical differences between actions, and Bonferroni method was used for multiple comparison correction; Using binary logistic regression (stepwise forward method) to identify factors independently associated with high-risk status; ROC curve is used to evaluate discriminative performance, and DeLong test is used to compare AUC differences. Among the 68 table tennis players, there were 27 cases (39.71%) in the high-risk group and 41 cases (60.29%) in the low-risk group. RM-ANOVA shows that the main effects of action types on various biomechanical indicators are significant ( P < 0.001, η² = 0.299 ~ 0.459). Overall, the knee joint biomechanical characteristics of table tennis players show a significant action dependence: the peak knee valgus angle, peak tibial acceleration, and angular acceleration of the step-stop task are significantly higher than those of forehand attack, backhand push, lateral spin and other actions ( P < 0.05). In the step-stop task, the peak knee valgus angle in the high-risk group was significantly higher than that in the low-risk group (15.62 ± 3.48 ° vs. 9.28 ± 2.56 °, P < 0.001), The difference is 6.34 °, and Cohen’s d = 2.08; The angular acceleration was also significantly higher in the high-risk group (732.48 ± 98.52 °/s ² vs. 601.32 ± 87.36 °/s ², P < 0.001), with an effect size Cohen’s d = 1.36. Correlation analysis showed a moderate positive correlation between the peak knee valgus angle and LESS score ( r = 0.652, 95% CI: 0.482 ~ 0.822, P < 0.001). Binary logistic regression analysis showed that peak knee valgus angle (OR = 2.354, 95% CI: 1.536 ~ 3.608, P < 0.001) and angular acceleration (OR = 1.018, 95% CI: 1.004 ~ 1.032, P = 0.010) were independently associated with high-risk status. ROC curve analysis showed that the AUC for distinguishing high-risk and low-risk athletes based on the peak knee valgus angle was 0.860 (95% CI: 0.768 ~ 0.952), with an optimal cutoff value of 12.5 °, sensitivity of 81.5%, and specificity of 82.9%. The AUC of the joint model (peak knee valgus angle+angular acceleration) increased to 0.904, significantly outperforming the single-indicator model (DeLong test, P = 0.038). Knee joint biomechanical characteristics extracted from IMU data can distinguish athletes with different LESS-based risk classifications in this cohort. Excessive knee valgus angle is a key characteristic associated with LESS-defined high-risk status. Throughout, ‘high risk’ refers to risk stratification based on the LESS score and not to ACL injury outcomes. The combination of peak knee valgus angle (cut-off 12.5°) and angular acceleration (reference value 685°/s²) may serve as a preliminary screening indicator set for on-site non-invasive monitoring, but its utility for identifying LESS-defined higher-risk individuals requires prospective validation against actual ACL injury outcomes.

Authors

Institutions

Publication Details

Journal
BMC Sports Science Medicine and Rehabilitation
Published
2026-11-14
DOI
https://doi.org/10.1186/s13102-026-02247-x
Primary Topic
Knee injuries and reconstruction techniques
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Knee joint biomechanical characteristics of table tennis players based on inertial sensing technology: impact on LESS-defined risk stratification for anterior cruciate ligament injury

Minyi Lu
BMC Sports Science Medicine and Rehabilitation
Knee injuries and reconstruction techniques
article

Knee joint biomechanical characteristics of table tennis players based on inertial sensing technology: impact on LESS-defined risk stratification for anterior cruciate ligament injury

Minyi Lu
article en

Abstract

To explore the feasibility of evaluating dynamic knee joint biomechanical characteristics in table tennis players using inertial measurement units (IMUs), and to identify sensitive biomechanical indicators associated with LESS-defined ACL injury risk stratification. We recruited 68 s level and above table tennis players and used the Landing Error Scoring System (LESS) to assess LESS-based ACL injury risk stratification. Those with a score ≥ 5 are included in the high-risk group, and those with a score < 5 are included in the low-risk group. All athletes wear IMU sensors to complete four tasks: fixed-point forehand attack, backhand push, lateral spin, and step-stop task, collecting data on knee joint flexion and extension angles, valgus angles, three-axis acceleration, and angular velocity. Single factor repeated measures analysis of variance (RM-ANOVA) was used to compare the biomechanical differences between actions, and Bonferroni method was used for multiple comparison correction; Using binary logistic regression (stepwise forward method) to identify factors independently associated with high-risk status; ROC curve is used to evaluate discriminative performance, and DeLong test is used to compare AUC differences. Among the 68 table tennis players, there were 27 cases (39.71%) in the high-risk group and 41 cases (60.29%) in the low-risk group. RM-ANOVA shows that the main effects of action types on various biomechanical indicators are significant ( P < 0.001, η² = 0.299 ~ 0.459). Overall, the knee joint biomechanical characteristics of table tennis players show a significant action dependence: the peak knee valgus angle, peak tibial acceleration, and angular acceleration of the step-stop task are significantly higher than those of forehand attack, backhand push, lateral spin and other actions ( P < 0.05). In the step-stop task, the peak knee valgus angle in the high-risk group was significantly higher than that in the low-risk group (15.62 ± 3.48 ° vs. 9.28 ± 2.56 °, P < 0.001), The difference is 6.34 °, and Cohen’s d = 2.08; The angular acceleration was also significantly higher in the high-risk group (732.48 ± 98.52 °/s ² vs. 601.32 ± 87.36 °/s ², P < 0.001), with an effect size Cohen’s d = 1.36. Correlation analysis showed a moderate positive correlation between the peak knee valgus angle and LESS score ( r = 0.652, 95% CI: 0.482 ~ 0.822, P < 0.001). Binary logistic regression analysis showed that peak knee valgus angle (OR = 2.354, 95% CI: 1.536 ~ 3.608, P < 0.001) and angular acceleration (OR = 1.018, 95% CI: 1.004 ~ 1.032, P = 0.010) were independently associated with high-risk status. ROC curve analysis showed that the AUC for distinguishing high-risk and low-risk athletes based on the peak knee valgus angle was 0.860 (95% CI: 0.768 ~ 0.952), with an optimal cutoff value of 12.5 °, sensitivity of 81.5%, and specificity of 82.9%. The AUC of the joint model (peak knee valgus angle+angular acceleration) increased to 0.904, significantly outperforming the single-indicator model (DeLong test, P = 0.038). Knee joint biomechanical characteristics extracted from IMU data can distinguish athletes with different LESS-based risk classifications in this cohort. Excessive knee valgus angle is a key characteristic associated with LESS-defined high-risk status. Throughout, ‘high risk’ refers to risk stratification based on the LESS score and not to ACL injury outcomes. The combination of peak knee valgus angle (cut-off 12.5°) and angular acceleration (reference value 685°/s²) may serve as a preliminary screening indicator set for on-site non-invasive monitoring, but its utility for identifying LESS-defined higher-risk individuals requires prospective validation against actual ACL injury outcomes.

BMC Sports Science Medicine and Rehabilitation
Guangzhou College of Technology and Business (CN)
Knee injuries and reconstruction techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon