Hydrocarbon removal performance in horizontal subsurface flow constructed wetlands enhanced by micro-bubble aeration or electrolysis
Constructed Wetlands (CWs) represent one of the most promising engineered nature-based solutions for wastewater treatment, particularly in low- and middle-income countries. CWs replicate the purification functions of natural wetlands through the combined action of aquatic plants, filtering substrates, and microbial communities. In this work the remediation of hydrocarbons was investigated by the integration of two technologies in recirculating constructed wetlands: micro-bubble aeration (CW2) and electrolysis (CW3). The wetlands were evaluated for their removal efficiency of phenol and toluene at varying concentrations, both individually and in combination, with and without wastewater. The micro-bubble aeration system consistently maintained high dissolved oxygen levels (>7 mg/L) and positive oxidation-reduction potential values throughout all experimental cycles, resulting in superior contaminant removal performance. Phenol degradation to non-detectable level was achieved within five days in CW2 at an initial concentration of 100 ppm, demonstrating accelerated removal compared to CW1 (control) and CW3. Similarly, toluene at the same concentration was eliminated faster in CW2 (4 days) than in the other two configurations. The electrolysis-integrated wetland demonstrated variable performance, characterized by distinct redox zones from strongly reducing conditions at cathodes to oxidizing environments at the anode. The microbial communities in the three constructed wetland systems differed based on treatment conditions, with specific genera dominating under different pollutants: Azospirillum in CW1 (control system), Pseudomonas in CW2, and Niveispirillum in CW3 when treating phenol alone. When toluene was introduced or when both pollutants were present, similar dominance patterns persisted, while real wastewater caused shifts favoring Pseudomonas in CW1 and CW2 and Dechloromonas and Acinetobacter in CW3. The presence of oxygen is a significant factor forming distinct communities while the microbubble aeration supported a less diverse but more specialized microbial community for efficient pollutant removal. All systems effectively treated conventional wastewater pollutants, with particularly high removal efficiencies for COD, phosphate, and total nitrogen. However, the micro-bubble aeration technology proved most effective for hydrocarbon removal, offering a promising solution for enhancing constructed wetland performance.
Authors
- Πετρούλα Σερίδου (ORCID: https://orcid.org/0000-0003-3684-3926)
- Nicolas Kalogerakis
- Anestis Vlysidis
- Maria Vamvakia
- Evdokia Syranidou
Institutions
- National Technical University of Athens (GR)
- Technical University of Crete (GR)
Publication Details
- Journal
- Journal of Water Process Engineering
- Published
- 2026-11-14
- DOI
- https://doi.org/10.1016/j.jwpe.2026.111224
- Primary Topic
- Constructed Wetlands for Wastewater Treatment
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- European Commission
- State Scholarships Foundation