Design Blueprint: A Photon-Counting EMCCD Observatory: Detector-Noise-Sized Design for a 2.4 Metre Coronagraph Telescope

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24225274): This paper presents a computed design study of a direct-imaging exoplanet observatory on a single stated operating principle: the coronagraph's focal plane is read by an electron-multiplying CCD operated in photon-counting mode, where a high multiplication gain lifts single-photoelectron events above the read noise and a threshold restores an effectively noiseless detector, so the exposure budget is set by photon statistics and clock-induced charge rather than by readout electronics. The system is a 2.4 metre space telescope with a hybrid-Lyot-class coronagraph whose camera is a photon-counting EMCCD, the whole observatory sized backwards from the detector noise budget. The design target is giant planets and the brightest terrestrial targets around the nearest stars, budgeted on a planet of flux ratio 5.0e-10 at 575 nanometres around a star 8 parsecs away. The resolution element is 49.4 milliarcseconds; the inner working angle is 148 milliarcseconds and the outer working angle 494 milliarcseconds. The planet delivers 2.73e-2 detected photons per second against a total background and noise variance rate of 7.53e-1, dominated by clock-induced charge, giving an exposure of 7.0 hours to reach signal-to-noise 5. The wavefront stability allocation of 25.0 picometres rms corresponds to a contrast floor of 7.46e-8, and the adopted residual contrast is 4.00e-10. The purpose throughout is civilian astronomy: detecting and characterizing planets around nearby stars. Nothing in the design is optimized for any other use, and the study has no targeting or weapon application. It is a computed study; every performance figure is simulated from the stated assumptions, not measured. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian direct-imaging exoplanet observatory system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-14
DOI
https://doi.org/10.5281/zenodo.24225642
Primary Topic
Adaptive optics and wavefront sensing
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Design Blueprint: A Photon-Counting EMCCD Observatory: Detector-Noise-Sized Design for a 2.4 Metre Coronagraph Telescope

William Alexander Aldred
Zenodo (CERN European Organization for Nuclear Research)
Adaptive optics and wavefront sensing
article

Design Blueprint: A Photon-Counting EMCCD Observatory: Detector-Noise-Sized Design for a 2.4 Metre Coronagraph Telescope

William Alexander Aldred
article en

Abstract

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24225274): This paper presents a computed design study of a direct-imaging exoplanet observatory on a single stated operating principle: the coronagraph's focal plane is read by an electron-multiplying CCD operated in photon-counting mode, where a high multiplication gain lifts single-photoelectron events above the read noise and a threshold restores an effectively noiseless detector, so the exposure budget is set by photon statistics and clock-induced charge rather than by readout electronics. The system is a 2.4 metre space telescope with a hybrid-Lyot-class coronagraph whose camera is a photon-counting EMCCD, the whole observatory sized backwards from the detector noise budget. The design target is giant planets and the brightest terrestrial targets around the nearest stars, budgeted on a planet of flux ratio 5.0e-10 at 575 nanometres around a star 8 parsecs away. The resolution element is 49.4 milliarcseconds; the inner working angle is 148 milliarcseconds and the outer working angle 494 milliarcseconds. The planet delivers 2.73e-2 detected photons per second against a total background and noise variance rate of 7.53e-1, dominated by clock-induced charge, giving an exposure of 7.0 hours to reach signal-to-noise 5. The wavefront stability allocation of 25.0 picometres rms corresponds to a contrast floor of 7.46e-8, and the adopted residual contrast is 4.00e-10. The purpose throughout is civilian astronomy: detecting and characterizing planets around nearby stars. Nothing in the design is optimized for any other use, and the study has no targeting or weapon application. It is a computed study; every performance figure is simulated from the stated assumptions, not measured. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian direct-imaging exoplanet observatory system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Zenodo (CERN European Organization for Nuclear Research)
Adaptive optics and wavefront sensing
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon