Comparison of cementation methods for excess cement and retention in implant-supported crowns: in vitro study

There are serious biological concerns associated with excess cement following cementation. This study aimed to investigate the effects of different replica materials, fabrication methods, and vent hole designs on the amount of excess cement and pull-out strength. Sixty abutments with analogues were torqued and embedded in resin blocks. Metal crowns were fabricated via laser sintering with a 50 μm cement gap and a pull-out ring ( n = 10); ten crowns had vent holes. Six groups were tested: (1) control with conventional cementation, (2) resin-ceramic replicas via 3D printing, (3) bis-acryl replicas, (4) silicone replicas, (5) PMMA replicas via CAD/CAM milling, and (6) crowns with a vent hole. During trial cementation on replicas, excess cement was removed. The remaining cement on definitive abutments was collected and weighed. Pull-out tests were conducted, and data analyzed with one-way ANOVA and Tamhane’s T2 post-hoc tests. All experimental methods showed significantly less residual cement than the control ( P < .001). Excess cement amounts ranked from highest to lowest were: control, vent hole, silicone, bis-acryl, CAD/CAM milling, and 3D printing. Pull-out strength was significantly higher only in the bis-acryl group compared to the control group ( P < .001), while the CAD/CAM PMMA group showed significantly lower values ( P < .001). All tested methods reduced cervical cement compared to conventional cementation. Bis-acryl replicas provided a favorable balance between cement reduction and retention, whereas CAD/CAM-milled PMMA replicas significantly reduced crown retention.

Authors

Institutions

Publication Details

Journal
BMC Oral Health
Published
2026-11-14
DOI
https://doi.org/10.1186/s12903-026-10434-y
Primary Topic
Dental materials and restorations
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Comparison of cementation methods for excess cement and retention in implant-supported crowns: in vitro study

İlknur Usta Kutlu, Sabire Büşra Demir
BMC Oral Health
Dental materials and restorations
article

Comparison of cementation methods for excess cement and retention in implant-supported crowns: in vitro study

İlknur Usta Kutlu, Sabire Büşra Demir
article en

Abstract

There are serious biological concerns associated with excess cement following cementation. This study aimed to investigate the effects of different replica materials, fabrication methods, and vent hole designs on the amount of excess cement and pull-out strength. Sixty abutments with analogues were torqued and embedded in resin blocks. Metal crowns were fabricated via laser sintering with a 50 μm cement gap and a pull-out ring ( n = 10); ten crowns had vent holes. Six groups were tested: (1) control with conventional cementation, (2) resin-ceramic replicas via 3D printing, (3) bis-acryl replicas, (4) silicone replicas, (5) PMMA replicas via CAD/CAM milling, and (6) crowns with a vent hole. During trial cementation on replicas, excess cement was removed. The remaining cement on definitive abutments was collected and weighed. Pull-out tests were conducted, and data analyzed with one-way ANOVA and Tamhane’s T2 post-hoc tests. All experimental methods showed significantly less residual cement than the control ( P < .001). Excess cement amounts ranked from highest to lowest were: control, vent hole, silicone, bis-acryl, CAD/CAM milling, and 3D printing. Pull-out strength was significantly higher only in the bis-acryl group compared to the control group ( P < .001), while the CAD/CAM PMMA group showed significantly lower values ( P < .001). All tested methods reduced cervical cement compared to conventional cementation. Bis-acryl replicas provided a favorable balance between cement reduction and retention, whereas CAD/CAM-milled PMMA replicas significantly reduced crown retention.

BMC Oral Health
Tokat Gaziosmanpaşa Üniversitesi (TR)
Dental materials and restorations
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon