Rotman printed lens for compact multipath antenna arrays
The article discusses the construction of a diagramming device based on the use of a Rotman lens. It has 9 inputs, which will form 9 directions for the main beam of the radiation pattern, and is designed to work with a linear antenna array, which consists of 5 elements. The main feature of the device under consideration is the use of printed circuit board technology to build a lens. For this purpose, the initial calculation equations were changed to take into account the presence of a substrate dielectric. The transition to a modular design allows you to reduce costs and simplify the manufacturing process of the structure. The FAF-4D dielectric was chosen as the substrate material. Its thickness is 1 mm. The article examines the characteristics of the diagramming device, which were obtained using electrodynamic modeling. The operating frequency of the lens is 5.8 GHz. The return losses turned out to be quite large, but the transmission coefficients deviated slightly from the typical values for a Rotman lens. Two lens options were also considered: with and without absorption ports. The influence of absorption ports on the integrity of the wavefront inside the lens and reflections from its side walls was compared.
Authors
- Sergey Fyodorov
- D. Fedorov
- Ilya Barannikov
Institutions
- Voronezh State University of Forestry and Technologies (RU)
Publication Details
- Journal
- Modeling of systems and processes
- Published
- 2026-11-13
- DOI
- https://doi.org/10.12737/2219-0767-2026-19-3-14-22
- Primary Topic
- Microwave Engineering and Waveguides
- Type
- article
- Field-Weighted Citation Impact
- 0.00