Effect of Cu-interlayer melting and Kovar® thickness on the hermeticity, microstructure and strength of silver-free alumina/Kovar® brazed joints
Hermetic alumina/Kovar® joints are essential for electrovacuum devices, but they are usually brazed with silver-based active fillers, which are prone to corrosion and electrochemical migration. Moreover, the commercial Cusil-ABA® filler fails to give reproducibly vacuum-tight joints when the Kovar® part is thick. We propose a silver-free alternative: a rapidly quenched amorphous Cu–Ti filler combined with a pure Cu interlayer that is melted completely during brazing. In this approach, the high-titanium filler ensures wetting of the ceramic, while the separately introduced copper forms a ductile seam. Without the interlayer, or when the interlayer only partly dissolves, hermeticity depends on the Kovar® thickness and is irreproducible. After complete melting of the interlayer, all 21 tested capsules showed no detectable helium leak (<5×10⁻¹³ Pa·m³/s), regardless of the Kovar® thickness, and the joints were stronger than Cusil-ABA® joints. Microstructural analysis shows that melting removes the continuous brittle intermetallic layer at the Kovar® and forms a continuous oxide layer at the ceramic. Complete melting of the Cu interlayer is thus the key condition for reliable silver-free alumina/Kovar® joints.
Authors
- Ivan Klyushin
- Julia Bondareva
- Stanislav Evlashin
- Pavel Dzhumaev
- Pavel Morokhov
- Alexander Ivannikov
- Yuri Nemchinov
- Sofia Terekhova
- Oleg Sevryukov
- Vladimir Mikhalchik
Institutions
- Skolkovo Institute of Science and Technology (RU)
- National Research Nuclear University MEPhI (RU)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-14
- DOI
- https://doi.org/10.5281/zenodo.24224708
- Primary Topic
- Electronic Packaging and Soldering Technologies
- Type
- preprint