Assessment of Mine Rock-Mass Stability Using Vibration and Micro-Seismic Monitoring
Here is the clean text version with the LaTeX symbols removed so it displays properly in your form without raw code: This laboratory report presents an integrated assessment of mine rock-mass stability utilizing a combined monitoring approach consisting of Vibrating Wire Sensors (VWS) and a 3-component micro-seismic monitoring system over a 30-day observation period. Investigating the mechanical and seismic response of rock masses subjected to excavation-induced stress redistribution, the study evaluates structural deformation, resonant frequency shifts, daily micro-seismic event counts, and spatial hypocenter migration. The publication details the operational principles and hardware architecture of both monitoring technologies—including electromagnetic coils and high-strength tensioned wires for VWS strain and displacement tracking, and 3-axis MEMS accelerometers equipped with servo-loop ASICs for capturing micro-fracturing vibrations. Through empirical data analysis, the report documents a progressive resonant frequency reduction from 1200 Hz to 1180.6 Hz, a cumulative deformation increase of 3.88 mm, and seismic activity peaking at 30 events/day around Day 27. Additionally, spatial X-Y coordinate scatter plots illustrate the migration of active fracture zones from X = 43-47 m to 52-53 m, offering critical predictive insights for underground ground-control safety.
Authors
- Prithik Roy Propel
Publication Details
- Journal
- Figshare
- Published
- 2026-11-14
- DOI
- https://doi.org/10.6084/m9.figshare.35011798
- Primary Topic
- Rock Mechanics and Modeling
- Type
- article
- Field-Weighted Citation Impact
- 0.00