Controlling Semi-Crystallinity in P3HT for Efficient Perovskite Solar Cells and Low-Power Applications
Abstract Poly(3-hexylthiophene) (P3HT) is a promising low-cost, hole-transport material for stable, scalable perovskite solar cells (PSCs). However, the performance of P3HT-based PSCs is often limited by suboptimal charge transport associated with disordered molecular aggregation and packing in solution-processed P3HT films. Here, we demonstrate a solvent-controlled strategy to regulate the molecular ordering and morphology of P3HT in MAPbI3-based PSCs. Chloroform and dichlorobenzene (DCB), selected for their different boiling points and evaporation rates, are combined to tune solvent evaporation during P3HT film formation. The optimized CHCl3/DCB (4:1) blend produces a compact, ordered film with reduced crystallite misorientation, yielding a champion PCE of 17.1% without additional interfacial passivation or modification of the P3HT hole-transport layer. The optimized processing conditions were also used to fabricate PSC modules with active areas up to 36 cm2. Under outdoor sunlight, a 36 cm2 module delivered an output power of approximately 0.1 W, while module-scale devices powered commercial low-power electronics under indoor illumination. Long-term ambient dark-storage measurements showed retention of ∼80% of the initial PCE after one year using a simple paraffin−acrylic encapsulation strategy. These results demonstrate that solvent-controlled molecular ordering and film morphology in P3HT influence photovoltaic performance and that this approach can be extended to larger-area PSC module fabrication for practical low-power energy-harvesting applications.
Authors
- Sridevi Chandran
- Shankar Prasad Koiry (ORCID: https://orcid.org/0000-0002-4031-0041)
- Purushottam Jha (ORCID: https://orcid.org/0000-0001-9512-4484)
- Anil Kumar Chauhan (ORCID: https://orcid.org/0000-0003-4896-9278)
- Jaspreet Singh1
- Veerender Putta
Institutions
- Bhabha Atomic Research Centre (IN)
- Homi Bhabha National Institute (IN)
- Chaudhary Charan Singh University (IN)
Publication Details
- Journal
- ACS Applied Engineering Materials
- Published
- 2026-11-14
- DOI
- https://doi.org/10.1021/acsaenm.6c00391
- Primary Topic
- Perovskite Materials and Applications
- Type
- article
- Field-Weighted Citation Impact
- 0.00