Nickel–Iron–Manganese Oxides Stabilize Oxygen Evolution in Seawater Electrolysis
Chloride‐induced corrosion poses significant challenges for hydrogen production via seawater electrolysis. Herein, we synthesize a trimetallic oxide catalyst on Ni foam (denoted as NiFeMnO x @NF). The catalyst is fabricated by electrodeposition to form a NiFeMnO x precursor, followed by annealing at 450 °C in air to form a protective layer composed of mixed metal oxides. The resulting catalyst exhibits an overpotential of 470 mV at a current density of 200 mA cm −2 and a Tafel slope of 93.6 mV dec −1 in simulated seawater. Notably, in a stability test at a high current density of 500 mA cm −2 for over 200 h, no significant corrosion is observed. We attribute this stability to the formation of mixed metal oxides (e.g., Fe 3 O 4 , NiMn 2 O 4 , and NiFe 2 O 4 ). This strategy offers a new design principle for chlorine‐corrosion‐resistant anodes in seawater electrolysis.
Authors
- Peng‐Jun Deng (ORCID: https://orcid.org/0009-0002-8067-2538)
- Jiajia Lu (ORCID: https://orcid.org/0000-0002-6510-2695)
- Li Sun
- Longji Li
- Baocheng Yang
- Weiwei Lu
- Shouren Zhang
Institutions
- Henan University of Science and Technology (CN)
- Shanxi University (CN)
- Huanghe Science and Technology College (CN)
Publication Details
- Journal
- ChemSusChem
- Published
- 2026-11-14
- DOI
- https://doi.org/10.1002/cssc.71236
- Primary Topic
- Electrocatalysts for Energy Conversion
- Type
- article
- Field-Weighted Citation Impact
- 0.00