Ballute Aerocapture at Titan: Towed Inflatable Decelerator, High-Altitude Corridor and Thermal Budgets
This paper presents a computed design study of a planetary entry system on a single stated operating principle: a large inflatable ballute towed behind the spacecraft on a tether presents a drag area far larger than any rigid shell that fits a launch fairing, dropping the ballistic coefficient so far that capture occurs high in Titan's extended atmosphere, where heating rates are low and the corridor is wide. The system is a 1,900 kilogram Titan orbiter towing a 12 metre inflatable ballute, arriving with a hyperbolic excess speed of 1.60 kilometres per second and targeting a captured apoapsis altitude of 20,000 kilometres in Titan's long-period initial orbit. The design target is capture at Titan, whose low gravity and extended nitrogen atmosphere reward a very low ballistic coefficient, without exposing the spacecraft itself to the deepest part of the pass. The design periapsis is 350 kilometres, the corridor is 24.2 kilometres wide, peak deceleration is 0.205 Earth gravities, peak heating is 0.277 watts per square centimetre, the heat load is 0.704 megajoules per square metre, and the thermal protection mass is 30.9 kilograms, a fraction 0.016 of the arrival mass. This work is a computed design study for civilian planetary science, with no targeting or weapon application. Its subject is the safe delivery of scientific payloads through a planetary atmosphere, and its numbers are simulated from stated assumptions rather than measured on hardware.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-14
- DOI
- https://doi.org/10.5281/zenodo.24229642
- Primary Topic
- Spacecraft Dynamics and Control
- Type
- article
- Field-Weighted Citation Impact
- 0.00