Design Blueprint: A Propulsive-Aerocapture Hybrid at Uranus: Rigid-Shell Drag with a Propulsive Trim Burn and Propellant Budgets

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24229981): This paper presents a computed design study of a planetary entry system on a single stated operating principle: a rigid aeroshell performs the bulk of the capture at Uranus, and a small propulsive burn, flown immediately after atmospheric exit, trims the exit-energy error the atmosphere left behind — the atmosphere supplies the kilometres per second, the engine supplies the metres per second, and the combination tolerates atmosphere uncertainty that neither system tolerates alone. The system is a 2,100 kilogram Uranus orbiter behind a 5.0 metre rigid aeroshell, arriving with a hyperbolic excess speed of 6.80 kilometres per second, targeting an apoapsis altitude of 80,000 kilometres, with a stated post-exit trim burn of 120 metres per second at a specific impulse of 320 seconds. The design target is capture at Uranus with the trim propellant, and the propellant a purely propulsive capture of the same velocity change would require, both computed so the hybrid's saving is a number rather than a claim. The design periapsis is 2000 kilometres, the corridor is 38.2 kilometres wide, peak deceleration is 2.12 Earth gravities, peak heating is 165 watts per square centimetre, the heat load is 261 megajoules per square metre, and the thermal protection mass is 424 kilograms, a fraction 0.202 of the arrival mass. This work is a computed design study for civilian planetary science, with no targeting or weapon application. Its subject is the safe delivery of scientific payloads through a planetary atmosphere, and its numbers are simulated from stated assumptions rather than measured on hardware. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian planetary-science atmospheric entry system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-14
DOI
https://doi.org/10.5281/zenodo.24230478
Primary Topic
Spacecraft Dynamics and Control
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Design Blueprint: A Propulsive-Aerocapture Hybrid at Uranus: Rigid-Shell Drag with a Propulsive Trim Burn and Propellant Budgets

William Alexander Aldred
Zenodo (CERN European Organization for Nuclear Research)
Spacecraft Dynamics and Control
article

Design Blueprint: A Propulsive-Aerocapture Hybrid at Uranus: Rigid-Shell Drag with a Propulsive Trim Burn and Propellant Budgets

William Alexander Aldred
article en

Abstract

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24229981): This paper presents a computed design study of a planetary entry system on a single stated operating principle: a rigid aeroshell performs the bulk of the capture at Uranus, and a small propulsive burn, flown immediately after atmospheric exit, trims the exit-energy error the atmosphere left behind — the atmosphere supplies the kilometres per second, the engine supplies the metres per second, and the combination tolerates atmosphere uncertainty that neither system tolerates alone. The system is a 2,100 kilogram Uranus orbiter behind a 5.0 metre rigid aeroshell, arriving with a hyperbolic excess speed of 6.80 kilometres per second, targeting an apoapsis altitude of 80,000 kilometres, with a stated post-exit trim burn of 120 metres per second at a specific impulse of 320 seconds. The design target is capture at Uranus with the trim propellant, and the propellant a purely propulsive capture of the same velocity change would require, both computed so the hybrid's saving is a number rather than a claim. The design periapsis is 2000 kilometres, the corridor is 38.2 kilometres wide, peak deceleration is 2.12 Earth gravities, peak heating is 165 watts per square centimetre, the heat load is 261 megajoules per square metre, and the thermal protection mass is 424 kilograms, a fraction 0.202 of the arrival mass. This work is a computed design study for civilian planetary science, with no targeting or weapon application. Its subject is the safe delivery of scientific payloads through a planetary atmosphere, and its numbers are simulated from stated assumptions rather than measured on hardware. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian planetary-science atmospheric entry system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Zenodo (CERN European Organization for Nuclear Research)
Spacecraft Dynamics and Control
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon