Automated pavement construction using 3D-printed concrete geocell to improve rutting performance
Abstract While 3D concrete printing (3DcP) is widely used in the field of building construction, limited research has focused on its usage in road construction applications. Previously, a conceptual idea was proposed to use the aggregate-bed 3D printing technique to create confinements similar to plastic geocell in unbound granular pavement layers. This study experimentally evaluates the rutting performance of pavement section confined by 3DcP geocells through laboratory-scale plate load tests under cyclic loading. Experimental results show that the 3DcP geocell outperforms the conventional plastic geocell in the short term. However, both systems provided similar confinement efficiency over the long term, which is attributed to interlayer debonding within the concrete geocell under repetitive loading. Despite that, the 3DcP geocell reduced rutting by 50% compared to the unconfined specimen, demonstrating its potential as an alternative to plastic geocell. The performance of the 3DcP geocell can be further improved by optimising the shape of the geocell confinement and increasing its mechanical strength.
Authors
- Pathmanathan Rajeev (ORCID: https://orcid.org/0000-0001-7731-8656)
- Kodikara Jayantha
- Bahirathan Koneswaran
- Jay Sanjayan
Institutions
- Monash University (AU)
- Swinburne University of Technology (AU)
Publication Details
- Journal
- Materials and Structures
- Published
- 2026-11-14
- DOI
- https://doi.org/10.1617/s11527-026-03362-4
- Primary Topic
- Innovations in Concrete and Construction Materials
- Type
- article
- Field-Weighted Citation Impact
- 0.00