The 300 and 450 Hertz Pair in GRO J1655-40: Orbital Radius Under a Measured Mass
This paper examines the 300 Hz and 450 Hz pair in a system with a dynamical mass measurement in GRO J1655-40, using published timing values as inputs and computing the radii, timescales and luminosity ratios that follow from them. The adopted centroid is 300 Hz with quality factor 6, fractional amplitude 5 per cent, and broadband break at 3 Hz. For an adopted mass of 6.3 solar masses and dimensionless spin 0.7, the gravitational radius is 9.303 km and the innermost stable orbit lies at 3.393 gravitational radii, where the orbital frequency is 737.9 Hz. If the centroid is read as an orbital frequency, the corresponding radius is 6.454 gravitational radii (60.04 km), a factor 1.902 times the innermost stable radius. The dynamical time is 0.0005305 s, the coherence duration is 0.02 s, and the light-crossing size limit is 159 km. The adopted X-ray luminosity corresponds to an Eddington ratio of 0.5039. A second frequency at 450 Hz gives a ratio of 1.5 and a separation of 150 Hz. The calculation states its orbital identification explicitly, reports the alternative precession and mode readings, and identifies which conclusions survive a change of mass or spin. All derived values are computed by the deposited script from the stated inputs.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-14
- DOI
- https://doi.org/10.5281/zenodo.24211000
- Primary Topic
- Pulsars and Gravitational Waves Research
- Type
- article
- Field-Weighted Citation Impact
- 0.00